On Fri, Feb 27, 2015 at 6:38 PM, Geert Uytterhoeven
<[email protected]> wrote:
> After the last user of the in_pd/in_pu bias parameters of the _PCRH()
> macro was removed in commit 80da8e02d22caaef ("sh-pfc: r8a7740: Add bias
> (pull-up/down) pinconf support"), bias parameters are supposed to be
> configured using the generic pinctl mechanism, which calls the
> .set_bias() method.
>
> However, the PORTCR() macro still represents the control register as
> consisting of two 4-bit fields. Hence the bias configuration in the
> uppermost 2 bits is always overwritten with zeroes when a pin is
> configured for GPIO, disabling any previously configured bias.
>
> Use the variable config register macro instead, to represent the
> register as having 4 fields, and to make sure only the input/output
> control and function fields are touched.
>
> This affects R-Mobile APE6 (r8a73a4), R-Mobile A1 (r8a7740), SH-Mobile
> AP4 (sh7372), and SH-Mobile AG5 (sh73a0).
>
> Signed-off-by: Geert Uytterhoeven <[email protected]>
Patch applied with Laurent's ACK.
Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
