This adds the callback for set_multiple.
As this controller has a separate set and clear register, we can't write
directly to PIO_ODSR as this would required a cached variable and would
race with at91_gpio_set.
So build masks for the PIO_SODR and PIO_CODR registers and write them
together.

Signed-off-by: Alexander Stein <[email protected]>
---
This was tested by using an own test driver which uses
gpiod_set_array_cansleep to set multiple GPIOs at once.

 drivers/pinctrl/pinctrl-at91.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index f4cd0b9..a882523 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -1330,6 +1330,33 @@ static void at91_gpio_set(struct gpio_chip *chip, 
unsigned offset,
        writel_relaxed(mask, pio + (val ? PIO_SODR : PIO_CODR));
 }
 
+static void at91_gpio_set_multiple(struct gpio_chip *chip,
+                                     unsigned long *mask, unsigned long *bits)
+{
+       struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+       void __iomem *pio = at91_gpio->regbase;
+       unsigned long set_mask;
+       unsigned long clear_mask;
+       size_t i;
+
+       set_mask = 0;
+       clear_mask = 0;
+
+       for (i = 0; i < chip->ngpio; i++) {
+               if (*mask == 0)
+                       break;
+               if (__test_and_clear_bit(i, mask)) {
+                       if (test_bit(i, bits))
+                               set_mask |= BIT(i);
+                       else
+                               clear_mask |= BIT(i);
+               }
+       }
+
+       writel_relaxed(set_mask, pio + PIO_SODR);
+       writel_relaxed(clear_mask, pio + PIO_CODR);
+}
+
 static int at91_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
                                int val)
 {
@@ -1692,6 +1719,7 @@ static struct gpio_chip at91_gpio_template = {
        .get                    = at91_gpio_get,
        .direction_output       = at91_gpio_direction_output,
        .set                    = at91_gpio_set,
+       .set_multiple           = at91_gpio_set_multiple,
        .dbg_show               = at91_gpio_dbg_show,
        .can_sleep              = false,
        .ngpio                  = MAX_NB_GPIO_PER_BANK,
-- 
2.3.3

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to