On Fri, Sep 25, 2015 at 04:05:58PM -0500, Adrian Alonso wrote:
> Add imx7d-sdb iomuxc-lpsr hoggrp-2 default pads settings
>
> Signed-off-by: Adrian Alonso <[email protected]>
Looked at this patch again, and please see comments below.
> ---
> Changes for V2: Resend
> Changes for V3: Resend
> Changes for V4: Resend
> Changes for V5: Resend
> Changes for V6:
> - Add wdog pinctrl group, add comments for hog2 group gpios
>
> arch/arm/boot/dts/imx7d-sdb.dts | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
> index 8059458..2da704a 100644
> --- a/arch/arm/boot/dts/imx7d-sdb.dts
> +++ b/arch/arm/boot/dts/imx7d-sdb.dts
> @@ -419,3 +419,23 @@
>
> };
> };
> +
> +&iomuxc_lpsr {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hog_2>;
> +
> + imx7d-sdb {
> + pinctrl_hog_2: hoggrp-2 {
> + fsl,pins = <
> + MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x14 /*
> usb_otg1_pwr */
Shouldn't this be handled by a pinctrl of regulator@0 ...
> + MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x59 /*
> sensor_int_b */
... and this by a pinctrl of regulator@2?
> + >;
> + };
> +
> + pinctrl_wdog: wdoggrp {
> + fsl,pins = <
> + MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x74
> + >;
> + };
Add this only when you have a user for it.
Shawn
> + };
> +};
> --
> 2.1.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
