On Tue, Sep 29, 2015 at 8:56 PM, Shawn Guo <[email protected]> wrote:
> On Mon, Sep 28, 2015 at 04:56:35PM -0500, Adrian Alonso wrote:
>> Remove incorrect can2-3v3 fixed regulator, imx7d-sdb doesn't
>> have a dedicated can2 fixed regulator instead it shares PERI_3V3
>> fixed regulator (RT8070ZS) which is enabled by default (hardwired)
>> from pmic pfuze3000 NVCC_3V3 power rail.
>
> @Frank, can you please confirm it?
@Aisheng,
Can you confirm it?
best regards
Frank Li
>
>>
>> Signed-off-by: Adrian Alonso <[email protected]>
>
> Please stop sending patch to [email protected], and
> [email protected] is good enough.
>
>> ---
>> Changes for V7: New patch in series
>
> I do not understand why the patch has to be included in this series.
>
> Shawn
>
>>
>> arch/arm/boot/dts/imx7d-sdb.dts | 11 +----------
>> 1 file changed, 1 insertion(+), 10 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/imx7d-sdb.dts
>> b/arch/arm/boot/dts/imx7d-sdb.dts
>> index 8059458..83f0053 100644
>> --- a/arch/arm/boot/dts/imx7d-sdb.dts
>> +++ b/arch/arm/boot/dts/imx7d-sdb.dts
>> @@ -78,16 +78,7 @@
>> enable-active-high;
>> };
>>
>> - reg_can2_3v3: regulator@2 {
>> - compatible = "regulator-fixed";
>> - reg = <2>;
>> - regulator-name = "can2-3v3";
>> - regulator-min-microvolt = <3300000>;
>> - regulator-max-microvolt = <3300000>;
>> - gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
>> - };
>> -
>> - reg_vref_1v8: regulator@3 {
>> + reg_vref_1v8: regulator@2 {
>> compatible = "regulator-fixed";
>> reg = <3>;
>> regulator-name = "vref-1v8";
>> --
>> 2.1.4
>>
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
