Hi Kazunori-san,
On Thu, Oct 15, 2009 at 07:22:43PM +0900, Kazunori INOUE wrote:
> Hi Dejan,
>
> Dejan Muhamedagic wrote:
> >Hi Kazunori-san,
> >
> >On Fri, Oct 09, 2009 at 07:17:15PM +0900, Kazunori INOUE wrote:
> >>Hi,
> >>
> >>I found that IPv6addr failed to assign the address in the following
> >>environments.
> >>I attached patch for IPv6addr in Cluster Resource Agents
> >>(changeset:de034cf1e9a1).
> >>
> >>1) environments
> >> # ifconfig bond0
> >> bond0 Link encap:Ethernet HWaddr 00:10:18:27:02:D3
> >> inet6 addr: 2001:db8:91:0:92::181/80 Scope:Global
> >> [snip]
> >>
> >> # ifconfig eth0
> >> eth0 Link encap:Ethernet HWaddr 00:1A:64:06:59:92
> >> inet6 addr: 2001:db8:91:0:91::182/64 Scope:Global
> >> [snip]
> >>
> >> # grep ^2001 /proc/net/if_inet6
> >> 20010db8009100000091000000000182 0e 40 00 80 eth0
> >> 20010db8009100000092000000000181 0c 50 00 80 bond0
> >> (* POINT which fails is this order.)
> >
> >You mean the order of interface list influences the processing?
> >
> Yes. (and it is also important that prefix_len is different.)
> IPv6addr will be successful if it is the following order.
>
> # grep ^2001 /proc/net/if_inet6
> 20010db8009100000092000000000181 0c 50 00 80 bond0
> 20010db8009100000091000000000182 0e 40 00 80 eth0
> #
>
> >>2) IPv6addr start op
> >> # env | grep OCF_RESKEY
> >> OCF_RESKEY_ipv6addr=2001:db8:91:0:92::189
> >> OCF_RESKEY_nic=bond0
> >> (* OCF_RESKEY_cidr_netmask is not specified intentionally.)
> >>
> >> # /usr/lib/ocf/resource.d/heartbeat/IPv6addr start
> >> # echo $?
> >> 1
> >> #
> >>
> >>I hope they are helpful to you.
> >>
> >>Regards,
> >>Kazunori INOUE
> >
> >>diff -urN agents.org/heartbeat/IPv6addr.c agents.mod/heartbeat/IPv6addr.c
> >>--- agents.org/heartbeat/IPv6addr.c 2009-10-09 15:13:50.000000000 +0900
> >>+++ agents.mod/heartbeat/IPv6addr.c 2009-10-09 15:19:36.000000000 +0900
> >>@@ -294,6 +294,7 @@
> >> /* release the pid file */
> >> unlink(pid_file);
> >>+ cl_log(LOG_DEBUG, "%s %s : %d", getenv("OCF_RESOURCE_INSTANCE"),
> >>argv[1], ret);
> >> return ret;
> >> }
> >> int
> >>@@ -513,7 +514,6 @@
> >> if (*plen_target!=0 && plen != *plen_target) {
> >> continue;
> >> }
> >>- *plen_target = plen;
> >> /* If interface name provided, only same devname entry
> >> * would be considered
> >>@@ -554,6 +554,7 @@
> >> /* We found it! */
> >> if (same) {
> >> fclose(f);
> >>+ *plen_target = plen;
> >> return devname;
> >> }
> >> }
> >
> >I looked at the code twice, but can't see how this patch would
> >make the difference. plen doesn't change in that code segment, so
> >how can moving that assignment make plen_target different. Can
> >you please explain in more detail.
> >
> Since plen is the value read from if_inet6 file, I recognize it as
> changing...
> When the line of eth0 is read, it's set as 64 (=0x40),
> and the line of bond0 is read, it's set as 80 (=0x50).
OK, now I got it. Sorry for being slow. I'll apply your patch.
Many thanks.
Cheers,
Dejan
> Please see the attached gdb.log for details.
>
> Best Regards,
> Kazunori INOUE
>
> >Cheers,
> >
> >Dejan
> >
> >>_______________________________________________________
> >>Linux-HA-Dev: [email protected]
> >>http://lists.linux-ha.org/mailman/listinfo/linux-ha-dev
> >>Home Page: http://linux-ha.org/
> >
> >_______________________________________________________
> >Linux-HA-Dev: [email protected]
> >http://lists.linux-ha.org/mailman/listinfo/linux-ha-dev
> >Home Page: http://linux-ha.org/
> # ifconfig bond0
> bond0 Link encap:Ethernet HWaddr 00:10:18:27:02:D3
> inet6 addr: 2001:db8:91:0:92::181/80 Scope:Global
> [snip] ---
>
> # ifconfig eth0
> eth0 Link encap:Ethernet HWaddr 00:1A:64:06:59:92
> inet6 addr: 2001:db8:91:0:91::182/64 Scope:Global
> [snip] ---
>
> # grep ^2001 /proc/net/if_inet6
> 20010db8009100000091000000000182 0e 40 00 80 eth0
> 20010db8009100000092000000000181 0c 50 00 80 bond0
> # --
>
> # env | grep OCF_RESKEY
> OCF_RESKEY_ipv6addr=2001:db8:91:0:92::189
> OCF_RESKEY_nic=bond0
> #
>
> # gdb ./IPv6addr
> GNU gdb Fedora (6.8-27.el5)
> Copyright (C) 2008 Free Software Foundation, Inc.
> License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
> This is free software: you are free to change and redistribute it.
> There is NO WARRANTY, to the extent permitted by law. Type "show copying"
> and "show warranty" for details.
> This GDB was configured as "x86_64-redhat-linux-gnu"...
> (gdb) b scan_if
> Breakpoint 1 at 0x4026ec: file IPv6addr.c, line 471.
> (gdb) run start
> Starting program: /usr/lib/ocf/resource.d/heartbeat/IPv6addr start
> [Thread debugging using libthread_db enabled]
> [New Thread 0x2ab77f177630 (LWP 8510)]
>
> Breakpoint 1, scan_if (addr_target=0x7fff2bd95630,
> plen_target=0x7fff2bd95524, use_mask=0,
> prov_ifname=0x7fff2bd95e9e "bond0") at IPv6addr.c:471
> 471 {
> (gdb) bt
> #0 scan_if (addr_target=0x7fff2bd95630, plen_target=0x7fff2bd95524,
> use_mask=0,
> prov_ifname=0x7fff2bd95e9e "bond0") at IPv6addr.c:471
> #1 0x0000000000402a59 in get_if (addr_target=0x7fff2bd95630,
> plen_target=0x7fff2bd95524,
> prov_ifname=0x7fff2bd95e9e "bond0") at IPv6addr.c:573
> #2 0x0000000000402363 in status_addr6 (addr6=0x7fff2bd95630, prefix_len=0,
> prov_ifname=0x7fff2bd95e9e "bond0") at IPv6addr.c:387
> #3 0x000000000040208e in start_addr6 (addr6=0x7fff2bd95630, prefix_len=0,
> prov_ifname=0x7fff2bd95e9e "bond0") at IPv6addr.c:304
> #4 0x0000000000401d35 in main (argc=2, argv=0x7fff2bd95848) at IPv6addr.c:273
> (gdb) c
> Continuing.
>
> Breakpoint 1, scan_if (addr_target=0x7fff2bd95630,
> plen_target=0x7fff2bd95564, use_mask=1,
> prov_ifname=0x7fff2bd95e9e "bond0") at IPv6addr.c:471
> 471 {
> (gdb) bt
> #0 scan_if (addr_target=0x7fff2bd95630, plen_target=0x7fff2bd95564,
> use_mask=1,
> prov_ifname=0x7fff2bd95e9e "bond0") at IPv6addr.c:471
> #1 0x0000000000402a0a in find_if (addr_target=0x7fff2bd95630,
> plen_target=0x7fff2bd95564,
> prov_ifname=0x7fff2bd95e9e "bond0") at IPv6addr.c:567
> #2 0x00000000004020af in start_addr6 (addr6=0x7fff2bd95630, prefix_len=0,
> prov_ifname=0x7fff2bd95e9e "bond0") at IPv6addr.c:309
> #3 0x0000000000401d35 in main (argc=2, argv=0x7fff2bd95848) at IPv6addr.c:273
> (gdb) p *plen_target
> $1 = 0
> (gdb) b IPv6addr.c:516
> Breakpoint 2 at 0x4027f9: file IPv6addr.c, line 516.
> (gdb) c
> Continuing.
>
> Breakpoint 2, scan_if (addr_target=0x7fff2bd95630,
> plen_target=0x7fff2bd95564, use_mask=1,
> prov_ifname=0x7fff2bd95e9e "bond0") at IPv6addr.c:516
> 516 *plen_target = plen;
> (gdb) p *plen_target
> $2 = 0
> (gdb) n
> 521 if (prov_ifname!=0 && *prov_ifname!=0)
> (gdb) p *plen_target
> $3 = 64
>
> /* **********************************************************************
> * plen_target "0" was overwrited by 64.
> * **********************************************************************/
>
> (gdb) n
> 523 if (strcmp(devname, prov_ifname))
> (gdb) p devname
> $4 = "eth0\0000", '\0' <repeats 14 times>
> (gdb) p prov_ifname
> $5 = 0x7fff2bd95e9e "bond0"
> (gdb) list
> 518 /* If interface name provided, only same devname entry
> 519 * would be considered
> 520 */
> 521 if (prov_ifname!=0 && *prov_ifname!=0)
> 522 {
> 523 if (strcmp(devname, prov_ifname))
> 524 continue;
> 525 }
> 526
> 527 for (i = 0; i< 4; i++) {
> (gdb) n
> 489 gboolean same = TRUE;
> (gdb) p *plen_target
> $6 = 64
> (gdb) b IPv6addr.c:513
> Breakpoint 3 at 0x4027d6: file IPv6addr.c, line 513.
> (gdb) c
> Continuing.
>
> Breakpoint 3, scan_if (addr_target=0x7fff2bd95630,
> plen_target=0x7fff2bd95564, use_mask=1,
> prov_ifname=0x7fff2bd95e9e "bond0") at IPv6addr.c:513
> 513 if (*plen_target!=0 && plen != *plen_target) {
> (gdb) p devname
> $7 = "bond0", '\0' <repeats 15 times>
> (gdb) p plen
> $8 = 80
> (gdb) p *plen_target
> $9 = 64
> (gdb) list
> 508 }
> 509
> 510 /* If specified prefix, only same prefix entry
> 511 * would be considered.
> 512 */
> 513 if (*plen_target!=0 && plen != *plen_target) {
> 514 continue;
> 515 }
> 516 *plen_target = plen;
> 517
>
> /* **********************************************************************
> * The value of plen_target "64" (please refer to the 72th line of this
> * log) is a value of eth0 read from if_inet6.
> * -----------------------------------------------------
> * 20010db8009100000091000000000182 0e 40 00 80 eth0
> * --
> * When plen_target is 0 here, the 514th line of IPv6addr.c ('continue;')
> * is not executed. Therefore, bond0 is selected.
> * **********************************************************************/
>
> (gdb) b IPv6addr.c:557
> Breakpoint 4 at 0x40298b: file IPv6addr.c, line 557.
> (gdb) b IPv6addr.c:561
> Breakpoint 5 at 0x4029a1: file IPv6addr.c, line 561.
> (gdb) c
> Continuing.
>
> Breakpoint 5, scan_if (addr_target=0x7fff2bd95630,
> plen_target=0x7fff2bd95564, use_mask=1,
> prov_ifname=0x7fff2bd95e9e "bond0") at IPv6addr.c:561
> 561 return NULL;
> (gdb) q
> The program is running. Exit anyway? (y or n) y
> #
>
>
> _______________________________________________________
> Linux-HA-Dev: [email protected]
> http://lists.linux-ha.org/mailman/listinfo/linux-ha-dev
> Home Page: http://linux-ha.org/
_______________________________________________________
Linux-HA-Dev: [email protected]
http://lists.linux-ha.org/mailman/listinfo/linux-ha-dev
Home Page: http://linux-ha.org/
