To debug this problem further, I downloaded fc11 from Fedora instead of using our internal version which was downloaded ~June 29, 2009.
With the version downloaded from Fedora, I then did: # wget -O /etc/yum.repos.d/pacemaker.repo http://clusterlabs.org/rpm/fedora-11/clusterlabs.repo # yum install -y pacemaker corosync heartbeat I then saw that /etc/ha.d/shellfuncs was present! I am going to configure the cluster and go from here. Thank you Andrew for the debugging help. In order to avoid other folks from running into the problem, do you have any tips on what I should investigate? Thanks again for your help, Bob ----- Original Message ---- From: Bob Schatz <[email protected]> To: [email protected] Sent: Mon, November 16, 2009 9:49:43 AM Subject: Re: [Linux-ha-dev] Problems starting heartbeat 3.0.1-1 - /etc/ha.d/shellfuncs "No such file or directory" [In reply to I missed Andrew's reply so I am including his comment and my results below: On my cluster I did: [r...@fc11-1 ~]# rpm -qi resource-agents | grep ersion Version : 3.0.4 Vendor: Fedora Project [r...@fc11-1 ~]# rpm -ql resource-agents | grep shellfunc /usr/share/cluster/ocf-shellfuncs [r...@fc11-1 ~]# Thanks, Bob ---------------------------------------------------------------------------------------------- [05:08 PM] root[at]f12 ~ # rpm -qi resource-agents | grep ersion Version : 3.0.4 Vendor: Fedora Project [05:07 PM] root[at]f12 ~ # rpm -ql resource-agents | grep shellfunc /etc/ha.d/shellfuncs <---- there /usr/lib/ocf/resource.d/heartbeat/.ocf-shellfuncs /usr/share/cluster/ocf-shellfuncs What version of resource-agents do you have installed? On Fri, Nov 13, 2009 at 3:52 AM, Bob Schatz <bschatz[at]yahoo.com> wrote: > For some reason I did not receive the email from Andrew so I am including it > below. > > Cluster glue was installed and I have attached the output from yum at the end > of this email. > > Also, I noticed that the files that used to reside in /usr/lib/ocf/resource.d/heartbeat/* are no longer there. I could not configure an IPaddr resource. > > > Thanks in advance > > Bob > > > that file should be part of cluster-glue... was that package not installed? > > On Wed, Nov 11, 2009 at 8:19 PM, Bob Schatz <bschatz[at]yahoo.com> wrote: >> Hi, >> >> I am new to Linux HA and I am having a problem with heartbeat 3.0.1. >> >> It appears that /etc/ha.d/shellfuncs is no longer in the release but it is >> still called from /etc/init.d/heartbeat. >> >> I reloaded a system with FC11 and then downloaded the pacemaker/heartbeat >> binaries as follows: >> >> # wget -O /etc/yum.repos.d/pacemaker.repo >> http://clusterlabs.org/rpm/fedora-11/clusterlabs.repo >> # yum install -y pacemaker corosync heartbeat >> >> I copied a ha.cf to /etc/ha.d/ha.cf and attempted to start heartbeat as >> follows: >> >> root[at]fc11-2:# sh -x /etc/init.d/heartbeat start >> + '[' -f /etc/sysconfig/heartbeat ']' >> + HA_DIR=/etc/ha.d >> + export HA_DIR >> + CONFIG=/etc/ha.d/ha.cf >> + . /etc/ha.d/shellfuncs >> /etc/init.d/heartbeat: line 51: /etc/ha.d/shellfuncs: No such file or >> directory >> >> >> I did not see this as a known problem on the mailing lists. >> >> >> Thanks, >> >> Bob > > > # yum install -y pacemaker corosync heartbeat > > Loaded plugins: refresh-packagekit > clusterlabs | 1.2 kB 00:00 > clusterlabs/primary | 14 kB 00:00 > clusterlabs > 47/47 > Setting up Install Process > Resolving Dependencies > --> Running transaction check > ---> Package corosync.x86_64 0:1.1.2-1.fc11 set to be updated > --> Processing Dependency: corosynclib = 1.1.2-1.fc11 for package: > corosync-1.1.2-1.fc11.x86_64 > --> Processing Dependency: libvotequorum.so.4(COROSYNC_VOTEQUORUM_1.0)(64bit) > for package: corosync-1.1.2-1.fc11.x86_64 > --> Processing Dependency: libconfdb.so.4(COROSYNC_CONFDB_1.0)(64bit) for > package: corosync-1.1.2-1.fc11.x86_64 > --> Processing Dependency: libcfg.so.4(COROSYNC_CFG_0.82)(64bit) for package: > corosync-1.1.2-1.fc11.x86_64 > --> Processing Dependency: libquorum.so.4(COROSYNC_QUORUM_1.0)(64bit) for > package: corosync-1.1.2-1.fc11.x86_64 > --> Processing Dependency: libpload.so.4(COROSYNC_PLOAD_1.0)(64bit) for > package: corosync-1.1.2-1.fc11.x86_64 > --> Processing Dependency: libcoroipcs.so.4()(64bit) for package: > corosync-1.1.2-1.fc11.x86_64 > --> Processing Dependency: liblogsys.so.4()(64bit) for package: > corosync-1.1.2-1.fc11.x86_64 > --> Processing Dependency: libquorum.so.4()(64bit) for package: > corosync-1.1.2-1.fc11.x86_64 > --> Processing Dependency: libconfdb.so.4()(64bit) for package: > corosync-1.1.2-1.fc11.x86_64 > --> Processing Dependency: libvotequorum.so.4()(64bit) for package: > corosync-1.1.2-1.fc11.x86_64 > --> Processing Dependency: libcfg.so.4()(64bit) for package: > corosync-1.1.2-1.fc11.x86_64 > --> Processing Dependency: libtotem_pg.so.4()(64bit) for package: > corosync-1.1.2-1.fc11.x86_64 > --> Processing Dependency: libcoroipcc.so.4()(64bit) for package: > corosync-1.1.2-1.fc11.x86_64 > --> Processing Dependency: libpload.so.4()(64bit) for package: > corosync-1.1.2-1.fc11.x86_64 > ---> Package heartbeat.x86_64 0:3.0.1-1.fc11 set to be updated > --> Processing Dependency: resource-agents for package: > heartbeat-3.0.1-1.fc11.x86_64 > --> Processing Dependency: cluster-glue-libs for package: > heartbeat-3.0.1-1.fc11.x86_64 > --> Processing Dependency: PyXML for package: heartbeat-3.0.1-1.fc11.x86_64 > --> Processing Dependency: cluster-glue for package: > heartbeat-3.0.1-1.fc11.x86_64 > --> Processing Dependency: libplumb.so.2()(64bit) for package: > heartbeat-3.0.1-1.fc11.x86_64 > --> Processing Dependency: libapphb.so.2()(64bit) for package: > heartbeat-3.0.1-1.fc11.x86_64 > --> Processing Dependency: libhbclient.so.1()(64bit) for package: > heartbeat-3.0.1-1.fc11.x86_64 > ---> Package pacemaker.x86_64 0:1.0.6-1.fc11 set to be updated > --> Processing Dependency: libcrmcluster.so.1()(64bit) for package: > pacemaker-1.0.6-1.fc11.x86_64 > --> Processing Dependency: libstonithd.so.0()(64bit) for package: > pacemaker-1.0.6-1.fc11.x86_64 > --> Processing Dependency: libcib.so.1()(64bit) for package: > pacemaker-1.0.6-1.fc11.x86_64 > --> Processing Dependency: libesmtp.so.5()(64bit) for package: > pacemaker-1.0.6-1.fc11.x86_64 > --> Processing Dependency: libpengine.so.3()(64bit) for package: > pacemaker-1.0.6-1.fc11.x86_64 > --> Processing Dependency: libtransitioner.so.1()(64bit) for package: > pacemaker-1.0.6-1.fc11.x86_64 > --> Processing Dependency: libcrmcommon.so.2()(64bit) for package: > pacemaker-1.0.6-1.fc11.x86_64 > --> Processing Dependency: libpe_status.so.2()(64bit) for package: > pacemaker-1.0.6-1.fc11.x86_64 > --> Processing Dependency: libpe_rules.so.2()(64bit) for package: > pacemaker-1.0.6-1.fc11.x86_64 > --> Running transaction check > ---> Package PyXML.x86_64 0:0.8.4-16.fc11 set to be updated > ---> Package cluster-glue.x86_64 0:1.0.1-1.fc11 set to be updated > --> Processing Dependency: libopenhpi.so.2()(64bit) for package: > cluster-glue-1.0.1-1.fc11.x86_64 > ---> Package cluster-glue-libs.x86_64 0:1.0.1-1.fc11 set to be updated > ---> Package corosynclib.x86_64 0:1.1.2-1.fc11 set to be updated > --> Processing Dependency: librdmacm.so.1(RDMACM_1.0)(64bit) for package: > corosynclib-1.1.2-1.fc11.x86_64 > --> Processing Dependency: libibverbs.so.1(IBVERBS_1.0)(64bit) for package: > corosynclib-1.1.2-1.fc11.x86_64 > --> Processing Dependency: libibverbs.so.1(IBVERBS_1.1)(64bit) for package: > corosynclib-1.1.2-1.fc11.x86_64 > --> Processing Dependency: libibverbs.so.1()(64bit) for package: > corosynclib-1.1.2-1.fc11.x86_64 > --> Processing Dependency: librdmacm.so.1()(64bit) for package: > corosynclib-1.1.2-1.fc11.x86_64 > ---> Package heartbeat-libs.x86_64 0:3.0.1-1.fc11 set to be updated > ---> Package libesmtp.x86_64 0:1.0.4-10.fc11 set to be updated > ---> Package pacemaker-libs.x86_64 0:1.0.6-1.fc11 set to be updated > ---> Package resource-agents.noarch 0:3.0.4-1.fc11 set to be updated > --> Running transaction check > ---> Package libibverbs.x86_64 0:1.1.2-2.fc11 set to be updated > ---> Package librdmacm.x86_64 0:1.0.7-2.fc11 set to be updated > ---> Package openhpi-libs.x86_64 0:2.14.0-2.fc11 set to be updated > --> Finished Dependency Resolution > > Dependencies Resolved > > ================================================================================ > > Package Arch Version Repository > Size > ================================================================================ > > Installing: > corosync x86_64 1.1.2-1.fc11 clusterlabs 166 > k > heartbeat x86_64 3.0.1-1.fc11 clusterlabs 196 > k > pacemaker x86_64 1.0.6-1.fc11 clusterlabs 667 > k > Installing for dependencies: > PyXML x86_64 0.8.4-16.fc11 updates 1.0 > M > cluster-glue x86_64 1.0.1-1.fc11 clusterlabs 268 > k > cluster-glue-libs x86_64 1.0.1-1.fc11 clusterlabs 129 > k > corosynclib x86_64 1.1.2-1.fc11 clusterlabs 168 > k > heartbeat-libs x86_64 3.0.1-1.fc11 clusterlabs 295 > k > libesmtp x86_64 1.0.4-10.fc11 fedora 62 > k > libibverbs x86_64 1.1.2-2.fc11 fedora 45 > k > librdmacm x86_64 1.0.7-2.fc11 fedora 23 > k > openhpi-libs x86_64 2.14.0-2.fc11 fedora 169 > k > pacemaker-libs x86_64 1.0.6-1.fc11 clusterlabs 310 > k > resource-agents noarch 3.0.4-1.fc11 updates 105 > k > > Transaction Summary > ================================================================================ > > Install 14 Package(s) > Upgrade 0 Package(s) > > Total download size: 3.6 M > Downloading Packages: > (1/14): PyXML-0.8.4-16.fc11.x86_64.rpm | 1.0 MB 00:13 > (2/14): cluster-glue-1.0.1-1.fc11.x86_64.rpm | 268 kB 00:02 > (3/14): cluster-glue-libs-1.0.1-1.fc11.x86_64.rpm | 129 kB 00:00 > (4/14): corosync-1.1.2-1.fc11.x86_64.rpm | 166 kB 00:03 > (5/14): corosynclib-1.1.2-1.fc11.x86_64.rpm | 168 kB 00:02 > (6/14): heartbeat-3.0.1-1.fc11.x86_64.rpm | 196 kB 00:01 > (7/14): heartbeat-libs-3.0.1-1.fc11.x86_64.rpm | 295 kB 00:01 > (8/14): libesmtp-1.0.4-10.fc11.x86_64.rpm | 62 kB 00:00 > (9/14): libibverbs-1.1.2-2.fc11.x86_64.rpm | 45 kB 00:00 > (10/14): librdmacm-1.0.7-2.fc11.x86_64.rpm | 23 kB 00:00 > (11/14): openhpi-libs-2.14.0-2.fc11.x86_64.rpm | 169 kB 00:00 > (12/14): pacemaker-1.0.6-1.fc11.x86_64.rpm | 667 kB 00:07 > (13/14): pacemaker-libs-1.0.6-1.fc11.x86_64.rpm | 310 kB 00:00 > (14/14): resource-agents-3.0.4-1.fc11.noarch.rpm | 105 kB 00:03 > -------------------------------------------------------------------------------- > > Total 86 kB/s | 3.6 MB 00:42 > Running rpm_check_debug > Running Transaction Test > Finished Transaction Test > Transaction Test Succeeded > Running Transaction > Installing : libibverbs-1.1.2-2.fc11.x86_64 > 1/14 > Installing : librdmacm-1.0.7-2.fc11.x86_64 > 2/14 > Installing : corosynclib-1.1.2-1.fc11.x86_64 > 3/14 > Installing : corosync-1.1.2-1.fc11.x86_64 > 4/14 > Installing : openhpi-libs-2.14.0-2.fc11.x86_64 > 5/14 > Installing : libesmtp-1.0.4-10.fc11.x86_64 > 6/14 > Installing : PyXML-0.8.4-16.fc11.x86_64 > 7/14 > Installing : resource-agents-3.0.4-1.fc11.noarch > 8/14 > Installing : cluster-glue-libs-1.0.1-1.fc11.x86_64 > 9/14 > Installing : cluster-glue-1.0.1-1.fc11.x86_64 > 10/14 > Installing : heartbeat-libs-3.0.1-1.fc11.x86_64 > 11/14 > Installing : heartbeat-3.0.1-1.fc11.x86_64 > 12/14 > Installing : pacemaker-1.0.6-1.fc11.x86_64 > 13/14 > Installing : pacemaker-libs-1.0.6-1.fc11.x86_64 > 14/14 > > Installed: > corosync.x86_64 0:1.1.2-1.fc11 heartbeat.x86_64 0:3.0.1-1.fc11 > pacemaker.x86_64 0:1.0.6-1.fc11 > > Dependency Installed: > PyXML.x86_64 0:0.8.4-16.fc11 cluster-glue.x86_64 0:1.0.1-1.fc11 > cluster-glue-libs.x86_64 0:1.0.1-1.fc11 corosynclib.x86_64 0:1.1.2-1.fc11 > heartbeat-libs.x86_64 0:3.0.1-1.fc11 libesmtp.x86_64 0:1.0.4-10.fc11 > libibverbs.x86_64 0:1.1.2-2.fc11 librdmacm.x86_64 0:1.0.7-2.fc11 > openhpi-libs.x86_64 0:2.14.0-2.fc11 pacemaker-libs.x86_64 > 0:1.0.6-1.fc11 > resource-agents.noarch 0:3.0.4-1.fc11 > > Complete! > root[at]fc11-1:# > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > _______________________________________________ > Linux-HA mailing list > Linux-HA[at]lists.linux-ha.org > http://lists.linux-ha.org/mailman/listinfo/linux-ha > See also: http://linux-ha.org/ReportingProblems > _______________________________________________ Linux-HA mailing list Linux-HA[at]lists.linux-ha.org http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems _______________________________________________________ Linux-HA-Dev: [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha-dev Home Page: http://linux-ha.org/ _______________________________________________________ Linux-HA-Dev: [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha-dev Home Page: http://linux-ha.org/
