I forgot to include my 'drbd.conf' file (comments stripped):
-=-=-] /etc/drbd.conf [-=-=-
global {
usage-count yes;
}
common {
syncer { rate 10M; }
}
resource r0 {
protocol C;
handlers {
pri-on-incon-degr "echo O > /proc/sysrq-trigger ; halt -f";
pri-lost-after-sb "echo O > /proc/sysrq-trigger ; halt -f";
outdate-peer "/usr/sbin/drbd-peer-outdater";
}
startup {
degr-wfc-timeout 120; # 2 minutes.
}
disk {
on-io-error detach;
}
net {
cram-hmac-alg "sha1";
shared-secret "ThisClusterIsSadlyNotAMermaid";
after-sb-0pri discard-least-changes;
after-sb-1pri consensus;
after-sb-2pri disconnect;
}
syncer {
rate 50M;
al-extents 257;
}
on vash {
device /dev/drbd0;
disk /dev/cciss/c0d0p3;
address 10.0.0.13:7788;
flexible-meta-disk internal;
}
on minuet {
device /dev/drbd0;
disk /dev/sda3;
address 10.0.0.14:7788;
meta-disk internal;
}
}
Thanks again. :)
Madison
_______________________________________________
Linux-HA mailing list
[email protected]
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems
