Rudi Ahlers wrote: > Hi all > > I wonder if someone can help me. I have a Gigabyte 8S661FXMP-RZ PIV > mobo with 10/100 onboard NIC (Sis900), which has been running happily > for more than 2 years on 192.168.0.6 on Suse 9.3. I recently upgraded > the machine to Suse 10.2 (fresh install 1 month ago), and it's been > working fine since yesterday. So, the NIC & the mobo works fine. > > Now, I added a new NIC yesterday for heartbeat, and configured it on > 192.168.100.2 (It's a D-Link DGE-528T) > > The problem is, the moment I reboot the server, the onboard NIC looses > it's IP address, yet the PCI one doesn't. > > > scanpci outpout: > > pci bus 0x0000 cardnum 0x04 function 0x00: vendor 0x1039 device 0x0900 > Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet > > pci bus 0x0000 cardnum 0x09 function 0x00: vendor 0x1186 device 0x4300 > D-Link System Inc DGE-528T Gigabit Ethernet Adapter > > lspci > > 00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 > PCI Fast Ethernet (rev 90) > 00:09.0 Ethernet controller: D-Link System Inc DGE-528T Gigabit > Ethernet Adapter (rev 10) > > > I can see that the IP address is configured for the NIC, both when I > use YaST's Network Devices control panel & cat the config file via SSH: > > ron:~ # cat /etc/sysconfig/network/ifcfg-eth-id-00\:0f\:ea\:c3\:3c\:55 > BOOTPROTO='static' > BROADCAST='' > ETHTOOL_OPTIONS='' > IPADDR='192.168.0.6' > MTU='' > NAME='Giga-byte SiS900 PCI Fast Ethernet' > NETMASK='255.255.255.0' > NETWORK='' > REMOTE_IPADDR='' > STARTMODE='auto' > UNIQUE='rBUF.yJBPB64E8RC' > USERCONTROL='no' > _nm_name='bus-pci-0000:00:04.0' > PREFIXLEN='' > > > Any suggestions? > Hi,
What do you mean it loses the I address? Are the interfaces (eth0, eth1...) created? During the boot are the interfaces activated correctly or it gives you some error? Regards, Jan _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
