hmmm... it appears my reply never got sent :-/ On 6/12/07, Thomas Åkerblom (HF/EBC) <[EMAIL PROTECTED]> wrote: > Hi Andrew. > Are the counters supposed to be zeroed at boot, as they seem to be in my case?
any values stored in the status section are discarded whenever the node starts this includes failcounts and (in most cases) standby and other node attributes. > Or is that my problem. > I would expect them to get their values from the running heartbeat system > (DC). > Is there a way to prevent the standby from trying to start the to services > simultainiously? in what sense do you mean simultaneously? at the same time as resources on another machine? or, all the resources at the same time on the standby node? > Also: > I have tried the same case with default value for failure stickiness but only > one you mean 0? > network for heartbeat. It behaves really bad. The standby may refuse to take > over any of the servers, regardless on what servers I disconnected the power. when failure stickiness = 0, then most of the time we'll only move the resource if the entire node fails. but pulling the power out pretty much qualifies on that front... so something else must be going on. if you get it into that state again, attach the result of "cibadmin -Ql" and i'll take a look _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
