Hi all, Am Freitag, 7. September 2007 schrieb Dejan Muhamedagic:
[...] > > When I bring all network interfaces down, the slave take the > > resources. All things works fine > > There is a difference between having cables removed (failover > doesn't work) and bringing interfaces down (failover works)? When all interfaces are disconnected (rcnetwork stop/restart) the slave get the resources... The difference is, that ifconfig show me the interfaces (bond0, vlan, etc) when I remove the cables. But the effect is the same... > > bond1 and bond2 are "direct links/crossover" and I can't see > > any production IP via this two interfaces. > > > > On bond0 there are two vlan interfaces. Over these interfaces I > > can see the production network (see ping_group). > > > > When I removed the link for bond0 (vlan 425/725) the master > > can't ping any ip from the ping group. > > > > On the master I get only these log entries: > > > > ----------- > > prod_lan:prod_lan dead. > > crmd[18174]: 2007/09/06_16:43:18 notice: > > crmd_ha_status_callback: Status update: Node prod_lan now has > > status [dead] > > heartbeat[18132]: 2007/09/06_16:43:18 info: Link > > nfs00002:vlan725 dead. > > heartbeat[18132]: 2007/09/06_16:43:18 info: Link > > nfs00002:vlan425 dead. > > crmd[18174]: 2007/09/06_16:43:18 WARN: get_uuid: Could not > > calculate UUID for prod_lan > > These log messages look normal given the circumstances. > > > Something is wrong in my config... > > > > Any hints? > > You should check that pingd attribute in the node's status > section. Otherwise, please attach full logs. Ok, I will do it next week. Sorry I'm out of the office:) Thanks for the hints!!! Best regards Andre _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
