Hello, I am trying to figure out why ipmilan STONITH loops on the following error:
heartbeat[20237]: 2007/09/19_23:11:40 info: Resetting node castor with [IPMI Over LAN] heartbeat[20237]: 2007/09/19_23:11:40 ERROR: glib: Unable to setup connection: 16 heartbeat[20237]: 2007/09/19_23:11:50 ERROR: glib: IPMI operation timed out... :( heartbeat[20237]: 2007/09/19_23:11:50 info: glib: Host castor ipmilan-reset error. Error = 6. the config looks as follow: in /etc/ha.d/ha.cf: stonith ipmilan /etc/ha.d/conf/stonith.ipmilan and in /etc/ha.d/conf/stonith.ipmilan: castor 192.168.7.3 623 md5 admin USER PASS pollux 192.168.7.4 623 md5 admin USER PASS querying the BMCs using ipmitool works fine: pollux:~# ipmitool -I lan -H 192.168.7.3 -A MD5 -U USER -P PASS chassis power status Chassis Power is on pollux:~# doing the STONITH by hand breaks does not: pollux:/tmp# stonith -t ipmilan -F /etc/ha.d/conf/stonith.ipmilan -T reset castor 18:08:11.372069 IP 192.168.7.2.32774 > 192.168.7.3.623: UDP, length 23 18:08:11.372073 IP 192.168.7.2.32774 > 192.168.7.3.623: UDP, length 23 18:08:11.373061 IP 192.168.7.3.623 > 192.168.7.2.32774: UDP, length 22 18:08:11.373061 IP 192.168.7.3.623 > 192.168.7.2.32774: UDP, length 22 ** (process:27593): CRITICAL **: Unable to setup connection: 16 ** (process:27593): CRITICAL **: IPMI operation timed out... :( ** INFO: Host castor ipmilan-reset error. Error = 6. I captured the chat between stonith and the BMC with tcpdump and looked into it using wireshark: stonith seems to not use authtype MD5 but PLAIN, and gets an AUTH_FAILED from the IPMI card. Setting both the stonith config and the BMC to authtype NONE does not do the trick, neither PLAIN/PASSWORD - it keeps throwing the errors above. Heartbeat used is 2.1.2, built against openipmi 2.0.7, architecture is amd64 with 64bit userland. Best regards Frederik Schüler -- ENOSIG
signature.asc
Description: Digital signature
_______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
