Hi, On Wed, Dec 05, 2007 at 05:11:35PM +0100, Sim wrote: > > > Can you help me for create VLAN "haresources.temp", for convert it in > > > cib.xml ? > > > > That's easy: just use haresources2cib.py. Note that the resulting > > CIB is probably going to need some fine tuning. See > > > > http://www.linux-ha.org/ClusterInformationBase/Conversion > > > > Thanks, > > > > Hi Dejan > I'm trying to set haresource and xml without good results. > I'm also trying IPaddr and IPaddr2 > > IPaddr::192.168.1.1/29/eth0.30
What does .30 stand for? Isn't your interface eth0? Your network part is really 29 bits long? The address should be a virtual address, i.e. one to be moved around between nodes. Is that the case? Can you check all these. Thanks, Dejan > IPaddr2::192.168.1.1/29/eth0.30 > > -------- > > Dec 5 17:00:13 sviluppo-lnx IPaddr2[26816]: [26827]: ERROR: > [/usr/lib/heartbeat/findif -C] failed > Dec 5 17:00:13 sviluppo-lnx crmd: [26798]: ERROR: process_lrm_event: > LRM operation IPaddr2_1_stop_0 (call=3, rc=2) Error invalid parameter > > Can you help me? > Very very very thanks! > Sim > _______________________________________________ > Linux-HA mailing list > [email protected] > http://lists.linux-ha.org/mailman/listinfo/linux-ha > See also: http://linux-ha.org/ReportingProblems _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
