Hello again,
I have another question about LSB scripts and standby now.
version information:
heartbeat-pils-2.1.2-3.el4.centos
heartbeat-stonith-2.1.2-3.el4.centos
heartbeat-gui-2.1.2-3.el4.centos
heartbeat-2.1.2-3.el4.centos
Question:
I have a group setup (GROUP_knworks_assp)
Here you can see it running normally.
I have put asknmapr02 in standby to do some maintenance on it, and reboot.
============
Last updated: Sat Dec 8 22:35:11 2007
Current DC: asknmapr01 (079c442e-2e70-4f27-94e4-b62bdc96602f)
2 Nodes configured.
1 Resources configured.
============
Node: asknmapr01 (079c442e-2e70-4f27-94e4-b62bdc96602f): online
Node: asknmapr02 (10c0f8ed-c275-43cc-a1c0-efdce4fc2809): standby
Resource Group: GROUP_knworks_assp
knworks_assp_ip (heartbeat::ocf:IPaddr2): Started asknmapr01
* knworks_assp_initscript (lsb:knworks_assp_init_script.sh):
Started asknmapr01*
When the asknmapr02 node came back up there was a problem with access to
the lsb:knworks_assp_init_script.sh file, and it shut the resource off
on asknmapr01 and failed it (see below)
============
Last updated: Sat Dec 8 22:29:03 2007
Current DC: asknmapr01 (079c442e-2e70-4f27-94e4-b62bdc96602f)
2 Nodes configured.
1 Resources configured.
============
Node: asknmapr01 (079c442e-2e70-4f27-94e4-b62bdc96602f): online
Node: asknmapr02 (10c0f8ed-c275-43cc-a1c0-efdce4fc2809): standby
Resource Group: GROUP_knworks_assp
knworks_assp_ip (heartbeat::ocf:IPaddr2): Started asknmapr01
* knworks_assp_initscript (lsb:knworks_assp_init_script.sh):
Started asknmapr02 (unmanaged) FAILED*
since node 2 (asknmapr02) is in standby, I assumed that it would not
even try, nor care to try and run it there? is this the intended action
(fail the resource) for the cluster to take if a node in standby cannot
run an LSB script?
Thanks!
-Jeff Humes
_______________________________________________
Linux-HA mailing list
[email protected]
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems
