Now I use HA + ipvs on debian 4.0 sir. this is structure == >
Master (10.x.x.149) lb0 Slave (10.x.x.146) lb2 I use ipvs style NAT mode. and use serial port config in ha.cf like this ha.cf on lb0 debugfile /var/log/ha-debug logfile /var/log/ha-log logfacility local0 bcast eth0 # Linux baud 9600 serial /dev/ttyS0 mcast eth0 225.0.0.1 694 1 0 auto_failback on #nice_failback on node lb0 node lb2 ping 10.x.x.254 respawn hacluster /usr/lib/heartbeat/ipfail apiauth ipfail gid=haclient uid=hacluster -------------------------------------------------------------- ha.cf on lb2 debugfile /var/log/ha-debug logfile /var/log/ha-log logfacility local0 bcast eth0 # Linux baud 9600 serial /dev/ttyS0 mcast eth0 225.0.0.1 694 1 0 auto_failback off #nice_failback on node lb0 node lb2 ping 10.x.x.254 respawn hacluster /usr/lib/heartbeat/ipfail apiauth ipfail gid=haclient uid=hacluster -------------------------------------------------------------- my question is if 1.if network at lb0 can't ping or die ,slave (lb2) will show log about lb0 is death but not take resource to it how can we config for take resource from lb0 . 2.Could you check for my 2 config file that correct for use Master and slave method ? Thank you for help me golfreeze Best regards, ########################### Watthanachai KEKHUA NTT Communication (Thailand) Co., Ltd System Service Group Office 02-6362707 ต่อ (3155) Direct +66-(0)2637-6195 ########################### _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
