Hi, On Wed, Jul 30, 2008 at 10:07:58AM +0200, Nick wrote: > Not to blame heartbeat, it seems that with apache 2 (2.2 and above > especially) that the way apache runs has changed, the binary is controlled > with apachectl now, the httpd binary won't return the proper numeric codes > directly.
It works fine here with opensuse 11.0 (apache 2.2.8) and SLES10 SP2 (apache 2.2.3). Did you enable the status module? Thanks, Dejan > using the httpd=/usr/sbin/httpd binary > or httpd=/usr/sbin/apachectl option, the ocf-test program continues to > reurn this error: > > # ocf-tester -n apache2 -o configfile=/etc/httpd/conf/httpd.conf -o > httpd=/usr/sbin/apachectl /usr/lib/ocf/resource.d/heartbeat/apache > Beginning tests for /usr/lib/ocf/resource.d/heartbeat/apache... > * rc=1: Monitoring a stopped resources should return 0 > Test updated to expect 1 for stopped resources for the remainder of this run > * rc=1: Monitoring an active resource should return 0 > * rc=2: The notify action cannot fail and must return 0 > * rc=2: Demoting a start resource should not fail > * rc=2: Promote failed > * rc=2: Demote failed > Aborting tests > > Same error using the httpd binary. > > I don't have the time, or the experience to write another ocf agent, so I'm > falling back to an LSB agent. > > Is there any way that this information could be shared more publicly (on > the linux-ha site possibly) to prevent other people from wasting days on > something that is impossible to correctly configure? > > CentOS 5.1 i386 with heartbeat 2.1.3-3, httpd-2.2.3-11 > > Nick > _______________________________________________ > Linux-HA mailing list > [email protected] > http://lists.linux-ha.org/mailman/listinfo/linux-ha > See also: http://linux-ha.org/ReportingProblems _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
