I'm running into a situation where I start HB on 3 nodes and they connect up 
and such but the resources never start. I'm assuming there's some type of error 
but I can't find it. Here's a small porition of the ha-log below.

  The 'tengine' has all these Pending states that don't occur when things seems 
to go right.

  Where should I be looking for errors?

thanks,
kevin

pengine[8223]: 2008/07/29_14:54:43 notice: group_print: Resource Group: fs123
pengine[8223]: 2008/07/29_14:54:43 notice: native_print:     fs123_address      
(heartbeat::ocf:IPaddr):        Stopped
pengine[8223]: 2008/07/29_14:54:43 notice: native_print:     fs123_filesystem   
(external::ocf:Filesystem2):    Stopped
pengine[8223]: 2008/07/29_14:54:43 notice: native_print:     fs123_daemon       
(external::ocf:PVFS2):  Stopped
pengine[8223]: 2008/07/29_14:54:43 notice: StartRsc:  fs121     Start 
fs121_address
pengine[8223]: 2008/07/29_14:54:43 notice: StartRsc:  fs121     Start 
fs121_filesystem
pengine[8223]: 2008/07/29_14:54:43 notice: StartRsc:  fs121     Start 
fs121_daemon
pengine[8223]: 2008/07/29_14:54:43 notice: RecurringOp: fs121      
fs121_daemon_monitor_20000
pengine[8223]: 2008/07/29_14:54:43 notice: StartRsc:  fs122     Start 
fs122_address
pengine[8223]: 2008/07/29_14:54:43 notice: StartRsc:  fs122     Start 
fs122_filesystem
pengine[8223]: 2008/07/29_14:54:43 notice: StartRsc:  fs122     Start 
fs122_daemon
pengine[8223]: 2008/07/29_14:54:43 notice: RecurringOp: fs122      
fs122_daemon_monitor_20000
pengine[8223]: 2008/07/29_14:54:43 notice: StartRsc:  fs123     Start 
fs123_address
pengine[8223]: 2008/07/29_14:54:43 notice: StartRsc:  fs123     Start 
fs123_filesystem
pengine[8223]: 2008/07/29_14:54:43 notice: StartRsc:  fs123     Start 
fs123_daemon
pengine[8223]: 2008/07/29_14:54:43 notice: RecurringOp: fs123      
fs123_daemon_monitor_20000
crmd[8169]: 2008/07/29_14:54:43 info: do_state_transition: State transition 
S_POLICY_ENGINE -> S_TRANSITION_ENGINE [ input=I_PE_SUCCESS cause=C_IPC_MESSAGE 
origin=route_message ]
tengine[8222]: 2008/07/29_14:54:43 info: unpack_graph: Unpacked transition 3: 
18 actions in 18 synapses
tengine[8222]: 2008/07/29_14:54:43 info: te_pseudo_action: Pseudo action 10 
fired and confirmed
tengine[8222]: 2008/07/29_14:54:43 info: te_pseudo_action: Pseudo action 18 
fired and confirmed
tengine[8222]: 2008/07/29_14:54:43 info: te_pseudo_action: Pseudo action 26 
fired and confirmed
tengine[8222]: 2008/07/29_14:54:43 notice: run_graph: 
====================================================
tengine[8222]: 2008/07/29_14:54:43 WARN: run_graph: Transition 3: (Complete=3, 
Pending=0, Fired=0, Skipped=0, Incomplete=15)
tengine[8222]: 2008/07/29_14:54:43 ERROR: te_graph_trigger: Transition failed: 
terminated
tengine[8222]: 2008/07/29_14:54:43 WARN: print_graph: Graph 3 (18 actions in 18 
synapses): batch-limit=30 jobs, network-delay=60000ms
tengine[8222]: 2008/07/29_14:54:43 WARN: print_graph: Synapse 0 was confirmed 
(priority: 0)
crmd[8169]: 2008/07/29_14:54:43 info: do_state_transition: State transition 
S_TRANSITION_ENGINE -> S_IDLE [ input=I_TE_SUCCESS cause=C_IPC_MESSAGE 
origin=route_message ]
tengine[8222]: 2008/07/29_14:54:43 WARN: print_graph: Synapse 1 is pending 
(priority: 0)
tengine[8222]: 2008/07/29_14:54:43 WARN: print_elem:     [Action 11]: Pending 
(id: fs121_running_0, type: pseduo, priority: 0)
tengine[8222]: 2008/07/29_14:54:43 WARN: print_elem:      * [Input 6]: Pending 
(id: fs121_address_start_0, loc: fs121, priority: 0)
tengine[8222]: 2008/07/29_14:54:43 WARN: print_elem:      * [Input 7]: Pending 
(id: fs121_filesystem_start_0, loc: fs121, priority: 0)
tengine[8222]: 2008/07/29_14:54:43 WARN: print_elem:      * [Input 8]: Pending 
(id: fs121_daemon_start_0, loc: fs121, priority: 0)
tengine[8222]: 2008/07/29_14:54:43 WARN: print_elem:      * [Input 10]: 
Completed (id: fs121_start_0, type: pseduo, priority: 0)
tengine[8222]: 2008/07/29_14:54:43 WARN: print_graph: Synapse 2 is pending 
(priority: 0)
tengine[8222]: 2008/07/29_14:54:43 WARN: print_elem:     [Action 6]: Pending 
(id: fs121_address_start_0, loc: fs121, priority: 0)
tengine[8222]: 2008/07/29_14:54:43 WARN: print_elem:      * [Input 7]: Pending 
(id: fs121_filesystem_start_0, loc: fs121, priority: 0)
tengine[8222]: 2008/07/29_14:54:43 WARN: print_elem:      * [Input 10]: 
Completed (id: fs121_start_0, type: pseduo, priority: 0)
tengine[8222]: 2008/07/29_14:54:43 WARN: print_graph: Synapse 3 is pending 
(priority: 0)
tengine[8222]: 2008/07/29_14:54:43 WARN: print_elem:     [Action 7]: Pending 
(id: fs121_filesystem_start_0, loc: fs121, priority: 0)
tengine[8222]: 2008/07/29_14:54:43 WARN: print_elem:      * [Input 6]: Pending 
(id: fs121_address_start_0, loc: fs121, priority: 0)
tengine[8222]: 2008/07/29_14:54:43 WARN: print_graph: Synapse 4 is pending 
(priority: 0)
tengine[8222]: 2008/07/29_14:54:43 WARN: print_elem:     [Action 8]: Pending 
(id: fs121_daemon_start_0, loc: fs121, priority: 0)
tengine[8222]: 2008/07/29_14:54:43 WARN: print_elem:      * [Input 6]: Pending 
(id: fs121_address_start_0, loc: fs121, priority: 0)
tengine[8222]: 2008/07/29_14:54:43 WARN: print_elem:      * [Input 7]: Pending 
(id: fs121_filesystem_start_0, loc: fs121, priority: 0)
_______________________________________________
Linux-HA mailing list
[email protected]
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems

Reply via email to