Hi,
I'm interested to know if it is possible to run multiple respawn
directives in ha.cf? For example:
# Heartbeat logging configuration
#logfacility daemon
use_logd on
# Heartbeat cluster menbers
coredumps yes
crm no
auto_failback on
node hosta hostb
# Heartbeat communication timing
keepalive 1
warntime 10
deadtime 30
initdead 120
# Heartbeat communication paths
udpport 694
bcast eth1
# syntax: mcast dev mcast-group udp-port ttl 1
mcast eth0 239.0.0.1 694 1 1
# Monitoring of network connection to default gateway
ping 10.10.11.254
respawn hacluster /usr/lib/heartbeat/ipfail
apiauth ipfail gid=haclient uid=hacluster
respawn hacluster /usr/lib/heartbeat/dopd
apiauth dopd gid=haclient uid=hacluster
My reason for asking is that with this configuration there i see no
errors while running heartbeat, however during testing, if the
gateway interface (10.10.11.254) disappears from one server but the
other can still see it, it fails over as expected. But after about 5
minutes it fails back (auto_failback on), even though the gateway is
still not visible from that server.
# rpm -q heartbeat
heartbeat-2.1.4-1.1
_______________________________________________
Linux-HA mailing list
[email protected]
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems
