Hi, On Thu, Sep 18, 2008 at 10:44:35AM +0800, heartbeat wrote: > Hi all, > A port of my cib.xml as follows: > ............................ > <group id="group1"> > <primitive id="ap_1_ip_217" class="ocf" type="IPaddr2" > provider="heartbeat"> > <instance_attributes id="ap_1_ip_attr_1"> > <attributes> > <nvpair id="ap_1_ipaddr_1" name="ip" value="10.1.41.217"/> > <nvpair id="ap_1_nic_1" name="nic" value="eth1:1"/> > <nvpair id="ap_1_mask_1" name="netmask" value="25"/> > </attributes> > </instance_attributes> > </primitive> > <primitive id="ap_1_ip_217_agent" class="ocf" type="myagent" > provider="heartbeat"> > <operations> > <op id="1" name="monitor" interval="5s" timeout="4s" > on_fail="restart"/> > </operations> > </primitive> > </group> > ........................... > I wrote my resource script "myagent", and heartbeat would call > the "monitor" action every 5s. I want that if the "monitor" > action failed(monitor action's return code isn't 0),the > resource group including "ap_1_ip_217" and > "ap_1_ip_217_agent" will re-allocate on the other node. So I > assign the value "restart" to the option "on_fail". But I > found that the rescource group did not re-allocate at all when > the monitor action return a non-zero code. why does it > happen? How can I achieve my goal?
If you want a resource to migrate to another node, then you should set the resource-stickiness appropriately. You can take a look here: http://www.linux-ha.org/v2/faq/forced_failover Thanks, Dejan > Thanks in advance! > _______________________________________________ > Linux-HA mailing list > [email protected] > http://lists.linux-ha.org/mailman/listinfo/linux-ha > See also: http://linux-ha.org/ReportingProblems _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
