Sorry, my first try to answer was a mistake. Think, if you want to manage the apache and the address with heartbeat so that the apache and the address can switch to the second node if the first fails, you MUST start and manage both apache and the virtual address from heartbeat, not at boot time of the machines.
Why you use the haresources-File? Is this heartbeat version 1? I use linux-ha Version 2 on SLES with virtual address for a NFS server. I dont use haresources. I set up native resources from class OCF for Ipaddr and NFS. I decided to write an order, so that NFS starts after IP setting, because if the IP isnt ready, the NFS Service is senseless. I also wrote an collocation between Ipaddr and NFS resource, so that these two resources every time run on the same node. I wrote the whole setting with hb_gui, the GUI from Version 2. Set up or switch the IP address works fine. Annette Am 21.10.2008 22:55 Uhr schrieb "Sweet, Larry D" unter <[EMAIL PROTECTED]>: > Hello, all. > I have been attempting to get a two-node cluster to work. So far I have > followed 6 tutorials and spent 4 days. > all I want right no is to get apache2 up and running. > I am configuring a two node-cluster but am just working on one, www1. > I cannot manage to get a virtual ip running as a resource. > Apache2 will not start. > I am on a virtual machine and using Ubuntu 8.04 with the latest Apache and > updates. > Is the virtual ip supposed to be configured and started before configuring > heartbeat? I have tried both ways. I have the > impression that the ip is started and monitored by heartbeat. Is it created > by heartbeat by using haresources? > I have configured /etc/networks/interfaces with eth0:0. It starts at boot-up. > > haresources: > www1u IPaddr2::144.120.10.49 > > cib.xml : > > <?xml version="1.0" ?> > - <cib admin_epoch="0" epoch="0" num_updates="0"> > - <configuration> > - <crm_config> > - <cluster_property_set id="cib-bootstrap-options"> > - <attributes> > <nvpair id="cib-bootstrap-options-symmetric-cluster" > name="symmetric-cluster" value="true" /> > <nvpair id="cib-bootstrap-options-no-quorum-policy" name="no-quorum-policy" > value="stop" /> > <nvpair id="cib-bootstrap-options-default-resource-stickiness" > name="default-resource-stickiness" value="0" /> > <nvpair id="cib-bootstrap-options-default-resource-failure-stickiness" > name="default-resource-failure-stickiness" value="0" /> > <nvpair id="cib-bootstrap-options-stonith-enabled" name="stonith-enabled" > value="false" /> > <nvpair id="cib-bootstrap-options-stonith-action" name="stonith-action" > value="reboot" /> > <nvpair id="cib-bootstrap-options-startup-fencing" name="startup-fencing" > value="true" /> > <nvpair id="cib-bootstrap-options-stop-orphan-resources" > name="stop-orphan-resources" value="true" /> > <nvpair id="cib-bootstrap-options-stop-orphan-actions" > name="stop-orphan-actions" value="true" /> > <nvpair id="cib-bootstrap-options-remove-after-stop" > name="remove-after-stop" value="false" /> > <nvpair id="cib-bootstrap-options-short-resource-names" > name="short-resource-names" value="true" /> > <nvpair id="cib-bootstrap-options-transition-idle-timeout" > name="transition-idle-timeout" value="5min" /> > <nvpair id="cib-bootstrap-options-default-action-timeout" > name="default-action-timeout" value="20s" /> > <nvpair id="cib-bootstrap-options-is-managed-default" > name="is-managed-default" value="true" /> > <nvpair id="cib-bootstrap-options-cluster-delay" name="cluster-delay" > value="60s" /> > <nvpair id="cib-bootstrap-options-pe-error-series-max" > name="pe-error-series-max" value="-1" /> > <nvpair id="cib-bootstrap-options-pe-warn-series-max" > name="pe-warn-series-max" value="-1" /> > <nvpair id="cib-bootstrap-options-pe-input-series-max" > name="pe-input-series-max" value="-1" /> > </attributes> > </cluster_property_set> > </crm_config> > <nodes /> > - <resources> > - <primitive class="ocf" id="IPaddr2_1" provider="heartbeat" type="IPaddr2"> > - <operations> > <op id="IPaddr2_1_mon" interval="5s" name="monitor" timeout="5s" /> > </operations> > - <instance_attributes id="IPaddr2_1_inst_attr"> > - <attributes> > <nvpair id="IPaddr2_1_attr_0" name="ip" value="144.120.10.49" /> > </attributes> > </instance_attributes> > </primitive> > </resources> > - <constraints> > - <rsc_location id="rsc_location_IPaddr2_1" rsc="IPaddr2_1"> > - <rule id="prefered_location_IPaddr2_1" score="100"> > <expression attribute="#uname" id="prefered_location_IPaddr2_1_expr" > operation="eq" value="www1u" /> > </rule> > </rsc_location> > </constraints> > </configuration> > <status /> > </cib> > Thanks for any help you care to give. I'm exhausted :o) > Thanks > Larry > _______________________________________________ > Linux-HA mailing list > [email protected] > http://lists.linux-ha.org/mailman/listinfo/linux-ha > See also: http://linux-ha.org/ReportingProblems _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
