Hi Nick,
Well, as you recommended I set an IP to eth2 NIC and it worked out :-D
. Thank you very much for your help. One more thing, that machine is
also a VPN server and the openvpn client's side complained about sending
the vpn start up request to ip A (assigned to eth2:0) and receiving the
response from ip B (assigned to eth2), so I added the "float" option to
the client's openvpn configuration file and everything is ok now. This
means that whatever packet sent from the server will have eth2's ip, but
I think this can be solved with IPsrsaddr resource agent ... so that's
the next thing I will experimenting with :-) Again Nick, thank you very
much for your help it was very ... well helpful ;-)
Regards,
Nick escribió:
Gabriel Bermudez ha scritto:
Hi Nick,
I followed your advise but it didn't work out. This are the content
of the files where I try to set the default gateway:
/etc/rc.local
ip route add default via xxx.xxx.xxx.xxx dev eth2
touch /var/lock/subsys/local
/etc/sysconfig/network-scripts/route-eth2
default via xxx.xxx.xxx.xxx
You can add the dev eth2 to the end of that comand, but it's not
required, as long as there's an interface with an IP in the same
subnet already on that network, which should be eth2 (although now you
mention that there isn't one assigned...).
Do you get any errors in /var/log/messages?
/etc/sysconfig/network
NETWORKING=yes
NETWORKING_IPV6=no
HOSTNAME=gw1.mynetwork.net
GATEWAY=xxx.xxx.xxx.xxx
none of this seems wrong..
I don't think it has something to do but the eth2 doesn't have an ip
assign to it
/etc/sysconfig/network-scripts/ifcfg-eth2
DEVICE=eth2
BOOTPROTO=none
HWADDR=00:15:17:3a:fa:be
ONBOOT=yes
TYPE=Ethernet
hmm, it's probably not going to work without having an interface with
a source address..
The logs should give you more information, or at least an error to start.
Thanks for your help.
Nick escribió:
Gabriel Bermudez ha scritto:
Hi,
I'm trying to configure a high availability router for my internal
network. I'm able to set both private and public ips on eth0:0 and
eth2:0 respectively with heartbeat. The gateway is configured
using the /etc/sysconfig/network file (using centos 5.2)
NETWORKING=yes
NETWORKING_IPV6=no
HOSTNAME=gw1.mynetwork.net
GATEWAY=xxx.xxx.xxx.xxx
but for some reason it doesn't persists when I reboot the server.
I have to manually use the route command to restore the default
gateway
route add -net 0.0.0.0 gw xxx.xxx.xxx.xxx
I've also tried to set up the route in "/etc/rc.local" and in
"/etc/sysconfig/network-scripts/route-eth2" files with no success.
I know that this is not a heartbeat related problem but I've tried
to google this with no success, so any help on this issue would be
greatly appreciated.
Thanks in advanced,
Gabriel.
Have a look at the ip comand (ip route in specific), and add
instead of all those lines add:
default via xxx.xxx.xxx.xxx
in the route-eth2 file.
ip is much simpler, and if you ever decide to do policy based
routing, much more powerful.
Nick
_______________________________________________
Linux-HA mailing list
[email protected]
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems
_______________________________________________
Linux-HA mailing list
[email protected]
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems
_______________________________________________
Linux-HA mailing list
[email protected]
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems
_______________________________________________
Linux-HA mailing list
[email protected]
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems
_______________________________________________
Linux-HA mailing list
[email protected]
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems
