Dear All, I am a total novice to HA and would like to implement it in active /stanby mode
i have the following hardware 2 P4 identical machines each with 2 network cards node 1: eth0 has ip address of 172.16.2.200 and connected to our local network eth1 has ip address 10.100.100.1 and connected by crossover to node 2 node 2: eth0 has ip address of 172.16.2.201 and connected to our local network eth1 has ip address of 10.100.100.2 and connect to node 1 by crossover now i istalled heartbeat as per the documentation, start the service and jus for test wanna use the http service now when i restart node 1 httpd service is automatically started on node 2 which is perfect and i see that there in another interface eth1:1 which has the ip address of eth1 of node 1 . so everythig is fine now when node1 comes back online heartbeat does not start .. gives a message ------------------------------ heartbeat[4764]: 2009/02/26_12:32:12 ERROR: glib: Get broadcast for interface eth1 failed: Cannot assign requested address heartbeat[4764]: 2009/02/26_12:32:12 ERROR: glib: IP interface [eth1] does not exist heartbeat[4764]: 2009/02/26_12:32:12 ERROR: Illegal bcast [UDP/IP broadcast] in config file [eth1] -------------- when i try to restart the network i see that eth1 does not start says there duplicate ip address as the eth1:1 on node 2 is still active and has the 10.100.100.1 ip address which is the ip address of eth1 on node1. my haresourses file node1 10.100.100.1 httpd ----------- how does the eth1:1 ip address on node 2 gets released automatically or where am i goin wrong really apprecite ur kind help regards simon -- Network ADMIN ------------- KUWAIT MUNICIPALITY: -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
