Dimitri Yioulos wrote:
> Heartbeat will create the IP address your haresources file should look
> something like:
>
> alpha IPaddr::192.168.5.2/24/eth0
>
>
> As to the IP address in haresources, it must be of the same subnet as the two
> nodes, right?
>
As long as routing is setup properly then I am under the impression that
it can be anything you like .
> As in:
>
> node 1 192.168.100.12/22
> node 2 192.168.100.6/22
> node 1 IPaddr::192.168.103.6/22/eth0
>
> (Of course, the CIDR 22 means that my netmask is 255.255.252.0, giving my LAN
> addresses 102.168.100.0 - 192.168.103.255).
>
> Also, is the construct IPaddr::192.168.103.6/22/eth0 correct? I'm not
> meaning
> to question you, but I've not seen it written like that in any of the stuff
> I've read.
>
No problem, I question myself all the time :p I believe there are
several ways to achieve the same goal. What I posted is what I have
been using and it works for me. What you have is correct if you're
following my method.
> Again, thanks.
>
> Dimitri
>
>
_______________________________________________
Linux-HA mailing list
[email protected]
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems
