On Mar 31, 2009, at 6:00 AM, Dejan Muhamedagic <[email protected]>
wrote:
Ciao,
On Tue, Mar 31, 2009 at 01:48:47PM +0200, Cristina Bulfon wrote:
Ciao,
in our heartbeat cluster we have simulated the breaking of the HBA by
unplugging the fiber from HBA on the primary node. The resource
didn't
switch to the secondary node and on the log file on primary node
reported
the following messages:
Feb 19 14:33:33 afsitfs3 kernel: qla2xxx 0000:0a:01.0: LOOP DOWN
detected
(2 e678 16ed).
Feb 19 14:33:38 afsitfs3 kernel: qla2xxx 0000:0a:01.1: LOOP DOWN
detected
(2 8633 16fc).
Feb 19 14:33:46 afsitfs3 kernel: qla2x00: FAILOVER device 2 from
200500a0b832d169 -> 200400a0b832d16a - LUN 10, reason=0x2
Feb 19 14:33:46 afsitfs3 kernel: qla2x00: FROM HBA 0 to HBA 1
Feb 19 14:33:52 afsitfs3 kernel: qla2x00: FAILOVER device 2 from
200400a0b832d16a -> 200500a0b832d16a - LUN 10, reason=0x2
Feb 19 14:33:52 afsitfs3 kernel: qla2x00: FROM HBA 1 to HBA 1
Feb 19 14:33:55 afsitfs3 kernel: qla2x00: FAILOVER device 2 from
200500a0b832d16a -> 200400a0b832d169 - LUN 10, reason=0x2
Feb 19 14:33:55 afsitfs3 kernel: qla2x00: FROM HBA 1 to HBA 0
Feb 19 14:33:58 afsitfs3 kernel: qla2x00: FAILOVER device 2 from
200400a0b832d169 -> 200500a0b832d169 - LUN 10, reason=0x2
Feb 19 14:33:58 afsitfs3 kernel: qla2x00: FROM HBA 0 to HBA 0
Feb 19 14:34:01 afsitfs3 kernel: qla2x00: FAILOVER device 2 from
200500a0b832d169 -> 200400a0b832d16a - LUN 10, reason=0x2
In some way I expected this kind of messages but I do not
understand why
the secondary node doesn't take the control of the resources.
In the ha.cf there is not nothing related to HBA and the
haresources file
is
afsitfs3.roma1.infn.it IPaddr2::Y.Y.Y.Y/24/eth0:0
afsitfs3.roma1.infn.it drbddisk::r0 Filesystem::/dev/drbd1::/
vicepa::xfs
afsitfs3.roma1.infn.it drbddisk::r1
Filesystem::/dev/drbd2::/usr/afs::ext3
afsitfs3.roma1.infn.it Y.Y.Y.Y afs
There's no resource monitoring with v1. For that you have to go
with v2/Pacemaker (aka CRM).
Also tried to use hbaping compiling the hbaapi_src_2.2 but without
success
.. got problem during the compilations and I didn't understand if I
have to
use libHBAAPI.so from hbaapi or from HBA vendor.
That could work with ipfail, perhaps.
Qlogic provides a libhbaapi with path identified in /etc/hba.conf and
iirc I had to symlink libHBAAPI to the lower case named same file. You
also have to install Qlogic's mgmt GUI to get the HBA API library
because it doesn't come with the driver.
Hth,
Robert
Thanks,
Dejan
Our FC controller is
Logic PCI to Fibre Channel Host Adapter for QLA2342:
Firmware version 3.03.25 IPX, Driver version 8.02.14.01-fo
Thanks in advance
cristina
_______________________________________________
Linux-HA mailing list
[email protected]
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems
_______________________________________________
Linux-HA mailing list
[email protected]
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems
_______________________________________________
Linux-HA mailing list
[email protected]
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems
