y Folks i am using 2 nodes with eth0, eth2 and serial
lbxx01 eth0 my ha.cf looks so (on one maschine the 2cond is the same exlude ping and ucast) debugfile /var/log/ha-debug logfile /var/log/ha-log logfacility local0 keepalive 2 warntime 5 deadtime 10 initdead 30 deadping 20 udpport 694 #bcast eth1 eth2 ucast eth0 10.23.5.212 ucast eth2 130.144.9.14 ucast eth0 10.23.5.212 ucast eth2 130.144.9.14 #respawn hacluster /usr/lib/heartbeat/ipfail #apiauth ipfail gid=haclient uid=had ping 130.144.9.14 ping 10.23.5.212 baud 38400 serial /dev/ttyS0 auto_failback on node lbcisxx01 node lbcisxx02 #debug 1 each node has a special pool configured in haresources, so the load was mixed on both 2 nodes like this example (30 IP's per node) haresources (example as short version) lbxx01 IPaddr::130.144.9.90 ldirectord::www01 lbxx02 IPaddr::130.144.9.80 ldirectord::www02 my Heartbeat (node1 and node2) is running well, if one node have a problem so the second node will handle the rest from the pool (and himselfe). i mean ... if on one node heartbeat are dead or machine was offline so the other node will make the takeover so the machie will going down or heartbeat is going down or crashed now it will go to complicate for me !! I will configure both nodes that in case of , eth0 or eth2 are dead (but ping was also possible), the second node will handle the pool. or with the serial cable connection one node have problems so also the other aktive node will handle the full pool i will check all conechtion .... if one is dead the second node should handle and start the second pool on ldirectord what is the best way to configure this ? is it possible on this way ? Thanks (great project :) ) _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
