Hello everybody, right now I am trying to set up stonith for out 3 node Cluster. We have 2 APC Smart UPS 1000 for this purpose. Both APC units are equipped with a extra network management card. All nodes are connected to the LAN via NIC1 and to a HB switch through NIC2.
This is my set up: APC1 (connected to LAN) Node1 (has only one power supply) Node3 (has two power supplies) APC2 (connected to LAN) Node2 (has only one power supply) Node3 (has two power supplies) Right now I am stuck and can not figure out how the apc plugins can send its shutdown commands to the APC throuh those network management cards. Does anyone know if that is possible? If that is not possible I must use the serial cable and not all nodes can comminicate to the APCs. This means I only can connect 2 of the three nodes and if I am thinking correctly this set up is not quite save in case of split brain. Thanks for your help Kolja Geschäftsführung: Dr. Michael Fischer, Reinhard Eisebitt Amtsgericht Köln HRB 32356 Steuer-Nr.: 217/5717/0536 Ust.Id.-Nr.: DE 204051920 -- This email transmission and any documents, files or previous email messages attached to it may contain information that is confidential or legally privileged. If you are not the intended recipient or a person responsible for delivering this transmission to the intended recipient, you are hereby notified that any disclosure, copying, printing, distribution or use of this transmission is strictly prohibited. If you have received this transmission in error, please immediately notify the sender by telephone or return email and delete the original transmission and its attachments without reading or saving in any manner.
_______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
