hareosurces based clusters do not have this capability. you need to upgrade to pacemaker: http://clusterlabs.org
On Wed, Sep 9, 2009 at 11:55 PM, jon heise<[email protected]> wrote: > i'm trying to set up a very simple ha virtual ip between hosts using > the following config: > logfacility daemon > udpport 31334 > bcast eth0 > keepalive 1 > warntime 5 > deadtime 15 > initdead 60 > auto_failback off > node hostone.example.com > node hosttwo.example.com > node virtual.example.com > respawn hacluster /usr/lib64/heartbeat/ipfail > use_logd yes > ping 192.168.1.42 192.168.1.43 > > and my haresource file is > virtual.example.com 192.168.1.50 > > i'll start hostone up first, it sees nothing has taken virtual yet and > will start the resource, then i start up hosttwo. > hosttwo runs for about 30 seconds then concludes that both virtual and > hostone are offline and with take the resource for itself leaving both > hostone and hosttwo with a virtual interface for virtual.example.com. > > both machines are running heartbeat 2.99-9.1, i pulled these configs > off of machines i have running with heartbeat 2.99-8.1 and changed the > udpport, the nodenames and the ip's. > > Is there is something i have missed, is there a bug in 2.99-9.1 > > > > > Jon Heise > Systems Engineer > Genius, Inc > 1400 Fashion Island Blvd, Suite 500 > 650 703 8615 (C) > > _______________________________________________ > Linux-HA mailing list > [email protected] > http://lists.linux-ha.org/mailman/listinfo/linux-ha > See also: http://linux-ha.org/ReportingProblems > _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
