Hi, On Thu, Sep 10, 2009 at 04:27:28PM +0200, Alain.Moulle wrote: > Hi, > I'm trying to configure a 2-nodes cluster with the new packages of > opensuse.org under fedora11/x86_64, > and the first configuration I try with hb_gui for a stonith resource > leads to errors in ha-debug or with > crm_verify -L -V (see below) whereas the hb_gui does not indicate any > error when I set all the parameters > of the resource ... > Thanks for help. > Alain > > # crm_verify -L -V > crm_verify[4110]: 2009/09/10_18:26:14 ERROR: unpack_rsc_op: Hard error - > res-to-fence-node0_start_0 failed with rc=2: Preventing > res-to-fence-node0 from re-starting on node0 > crm_verify[4110]: 2009/09/10_18:26:14 WARN: unpack_rsc_op: Processing > failed op res-to-fence-node0_start_0 on node0: invalid parameter
The configuration for this resource is wrong, i.e. you provided a parameter which is not recognized. Thanks, Dejan > crm_verify[4110]: 2009/09/10_18:26:14 WARN: common_apply_stickiness: > Forcing res-to-fence-node0 away from node0 after 1000000 failures > (max=1000000) > crm_verify[4110]: 2009/09/10_18:26:14 WARN: native_color: Resource > res-to-fence-node0 cannot run anywhere > Warnings found during check: config may not be valid > [ > _______________________________________________ > Linux-HA mailing list > [email protected] > http://lists.linux-ha.org/mailman/listinfo/linux-ha > See also: http://linux-ha.org/ReportingProblems _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
