I have a new 2-node cluster I am attmpting to setup and I have run into syntax issues with the constraints setion of the xml config. This setup is a copy of a current cluster I have.
Both run rhel5 on proliant servers. old setup: libheartbeat2-2.99.2-8.1 heartbeat-resources-2.99.2-8.1 heartbeat-common-2.99.2-8.1 heartbeat-2.99.2-8.1 pacemaker-1.0.3-2.2 libpacemaker3-1.0.3-2.2 new setup(epel pkgs): heartbeat 3.0.1-1.el5 heartbeat-libs 3.0.1-1.el5 pacemaker 1.0.7-2.el5 pacemaker-libs 1.0.7-2.el5 cluster-glue 1.0.1-1.el5 cluster-glue-libs 1.0.1-1.el5 corosync 1.2.0-1.el5 corosynclib 1.2.0-1.el5 resource-agents 1.0.1-1.el5 I attmpted to load the modified xml config from old to new and received errors : r...@wispoller2 configs]# cibadmin -V --replace --xml-file wispoller.xml Call cib_replace failed (-47): Update does not conform to the configured schema/DTD I then ran crm_verify -V --xml-file wispoller.xml and attempted to work through resultant conflicts mostly by trial and error however when I got to the constraints section I must admit I'm hooped. Here are the last errors i recieved : [r...@wispoller2 configs]# crm_verify -V --xml-file wispoller.xml wispollerv4.xml:98: element rsc_order: Relax-NG validity error : Expecting an element resource_set, got nothing wispollerv4.xml:98: element rsc_order: Relax-NG validity error : Element rsc_order failed to validate content wispollerv4.xml:88: element rsc_location: Relax-NG validity error : Element constraints has extra content: rsc_location wispollerv4.xml:2: element configuration: Relax-NG validity error : Invalid sequence in interleave wispollerv4.xml:2: element configuration: Relax-NG validity error : Element configuration failed to validate content wispollerv4.xml:1: element cib: Relax-NG validity error : Element cib failed to validate content crm_verify[26599]: 2010/01/29_11:15:59 ERROR: main: CIB did not pass DTD/schema validation Errors found during check: config not valid [r...@wispoller2 configs]# Below is the complete config. The question is how can the clone constraints be rewritten to conform ? In addition I had to change : <rule id="stonith_rule01" score="-INFINITY" boolean_op="and"> to : <rule id="stonith_rule01" score="-INFINITY"> to allow it to pass ... Thanks wispoller.xml <cib epoch="9" num_updates="2" admin_epoch="0" validate-with="pacemaker-1.0" crm_feature_set="3.0.1" have-quorum="1" dc-uuid="967c404e-2d58-49a7-977a-76e5a1d5f214"> <configuration> <crm_config> <cluster_property_set id="cib-bootstrap-options"> <nvpair id="cib-bootstrap-options-dc-version" name="dc-version" value="1.0.7-d3fa20fc76c7947d6de66db7e52526dc6bd7d782"/> <nvpair id="cib-bootstrap-options-cluster-infrastructure" name="cluster-infrastructure" value="Heartbeat"/> </cluster_property_set> </crm_config> <nodes> <node id="4a7332d6-e352-4315-ac88-ac080ed45e60" uname="wispoller1" type="normal"/> <node id="967c404e-2d58-49a7-977a-76e5a1d5f214" uname="wispoller2" type="normal"/> </nodes> <resources> <group id="grp_1"> <primitive id="IPaddr_165_115_204_218" class="ocf" provider="heartbeat" type="IPaddr"> <operations> <op id="IPaddr_165_115_204_218_mon" name="monitor" interval="5s" timeout="5s"/> </operations> <instance_attributes id="params-IPaddr_165_115_204_218"> <nvpair id="IPaddr_165_115_204_218-addr" name="ip" value="165.115.204.218"/> </instance_attributes> </primitive> <primitive id="drbddisk_2" class="heartbeat" type="drbddisk"> <operations> <op id="drbddisk_2_mon" interval="120s" name="monitor" timeout="60s"/> </operations> <instance_attributes id="drbddisk_2_inst_attr"> <nvpair id="drbddisk_2_attr_1" name="1" value="r0"/> </instance_attributes> </primitive> <primitive id="Filesystem_3" class="ocf" provider="heartbeat" type="Filesystem"> <operations> <op id="Filesystem_3_mon" interval="120s" name="monitor" timeout="60s"/> </operations> <instance_attributes id="Filesystem_3_inst_attr"> <nvpair id="Filesystem_3_attr_0" name="device" value="/dev/drbd0"/> <nvpair id="Filesystem_3_attr_1" name="directory" value="/drbd"/> <nvpair id="Filesystem_3_attr_2" name="fstype" value="ext3"/> <nvpair id="Filesystem_3_attr_3" name="options" value="defaults"/> </instance_attributes> </primitive> <primitive id="rc.primary_5" class="lsb" type="rc.primary"> <operations> <op id="rc.primary_5_mon" interval="120s" name="monitor" timeout="60s"/> </operations> </primitive> </group> <clone id="CL_stonithset_node01"> <meta_attributes id="CL_stonithset_node01-attr"> <nvpair id="CL_stonithset_node01_clone_node_max" name="clone_node_max" value="1"/> </meta_attributes> <primitive id="CL_stonith_node01" class="stonith" type="external/riloe-iders"> <operations> <op id="CL_stonith_node01_monitor" name="monitor" interval="30s" timeout="20s"/> </operations> <instance_attributes id="CL_stonith_node01-attr"> <nvpair id="CL_stonith_node01_hostlist" name="hostlist" value="wispoller1"/> <nvpair id="CL_stonith_node01_ilo_hostname" name="ilo_hostname" value="wispoller1-ilo"/> <nvpair id="CL_stonith_node01_ilo_user" name="ilo_user" value="Heartbeat"/> <nvpair id="CL_stonith_node01_ilo_password" name="ilo_password" value="xxxxxxxxxx"/> <nvpair id="CL_stonith_node01_ilo_can_reset" name="ilo_can_reset" value="0"/> <nvpair id="CL_stonith_node01_ilo_protocol" name="ilo_protocol" value="2.0"/> <nvpair id="CL_stonith_node01_ilo_powerdown_method" name="ilo_powerdown_method" value="button"/> </instance_attributes> </primitive> </clone> <clone id="CL_stonithset_node02"> <meta_attributes id="CL_stonithset_node02-attr"> <nvpair id="CL_stonithset_node02_clone_node_max" name="clone_node_max" value="1"/> </meta_attributes> <primitive id="CL_stonith_node02" class="stonith" type="external/riloe-iders"> <operations> <op id="CL_stonith_node02_monitor" name="monitor" interval="30s" timeout="20s"/> </operations> <instance_attributes id="CL_stonith_node02-attr"> <nvpair id="CL_stonith_node02_hostlist" name="hostlist" value="wispoller2"/> <nvpair id="CL_stonith_node02_ilo_hostname" name="ilo_hostname" value="wispoller2-ilo"/> <nvpair id="CL_stonith_node02_ilo_user" name="ilo_user" value="Heartbeat"/> <nvpair id="CL_stonith_node02_ilo_password" name="ilo_password" value="xxxxxxxxxx"/> <nvpair id="CL_stonith_node02_ilo_can_reset" name="ilo_can_reset" value="0"/> <nvpair id="CL_stonith_node02_ilo_protocol" name="ilo_protocol" value="2.0"/> <nvpair id="CL_stonith_node02_ilo_powerdown_method" name="ilo_powerdown_method" value="button"/> </instance_attributes> </primitive> </clone> </resources> <constraints> <rsc_location id="stonith_node01" rsc="CL_stonithset_node01"> <rule id="stonith_rule01" score="-INFINITY"> <expression id="stonith_expression01" attribute="#uname" operation="eq" value="wispoller1"/> </rule> </rsc_location> <rsc_location id="stonith_node02" rsc="CL_stonithset_node02"> <rule id="stonith_rule02" score="-INFINITY"> <expression id="stonith_expression02" attribute="#uname" operation="eq" value="wispoller2"/> </rule> </rsc_location> <rsc_colocation id="stonith_not_same" from="CL_stonithset_node02" to="CL_stonithset_node01" score="-INFINITY"/> <rsc_location id="rsc_location_group_1" rsc="grp_1"> <rule id="prefered_location_group_1" score="100"> <expression attribute="#uname" id="prefered_location_group_1_expr" operation="eq" value="wispoller1"/> </rule> </rsc_location> </constraints> </configuration> </cib> _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
