On Fri, May 14, 2010 at 12:09:25PM +0100, Maros Timko wrote: > Hi all, > > using: > heartbeat-libs-3.0.1-1.el5.x86_64 > heartbeat-3.0.1-1.el5.x86_64 > This is what I can see in process tree: > root 11991 0.0 0.2 35584 1148 ? S 15:14 0:00 > /usr/lib64/heartbeat/ha_logd -d -c /etc/logd.cf > root 11992 0.0 0.1 35584 684 ? S 15:14 0:00 \_ > /usr/lib64/heartbeat/ha_logd -d -c /etc/logd.cf > root 12073 0.0 1.2 49404 6448 ? SLs 15:14 0:00 > /usr/lib64/heartbeat/heartbeat > root 12098 0.0 1.1 49240 6284 ? SL 15:14 0:00 \_ > /usr/lib64/heartbeat/heartbeat > root 12101 0.0 1.1 49236 6280 ? SL 15:14 0:00 \_ > /usr/lib64/heartbeat/heartbeat > root 12102 0.0 1.1 49236 6280 ? SL 15:14 0:00 \_ > /usr/lib64/heartbeat/heartbeat > root 12103 0.0 1.1 49236 6280 ? SL 15:14 0:00 \_ > /usr/lib64/heartbeat/heartbeat > root 12104 0.0 1.1 49236 6280 ? SL 15:14 0:00 \_ > /usr/lib64/heartbeat/heartbeat > root 12105 0.0 1.1 49236 6280 ? SL 15:14 0:00 \_ > /usr/lib64/heartbeat/heartbeat > root 12106 0.0 1.1 49236 6280 ? SL 15:14 0:00 \_ > /usr/lib64/heartbeat/heartbeat > root 12107 0.0 1.1 49236 6280 ? SL 15:14 0:00 \_ > /usr/lib64/heartbeat/heartbeat > root 12108 0.0 1.1 49236 6280 ? SL 15:14 0:00 \_ > /usr/lib64/heartbeat/heartbeat > 783 12118 0.0 0.2 35604 1284 ? S 15:14 0:00 \_ > /usr/lib64/heartbeat/dopd > 783 12119 0.0 0.3 42280 1884 ? S 15:14 0:00 \_ > /usr/lib64/heartbeat/ccm > 783 12120 0.0 0.8 65192 4436 ? S 15:14 0:00 \_ > /usr/lib64/heartbeat/cib > root 12121 0.0 0.3 62964 1916 ? S 15:14 0:00 \_ > /usr/lib64/heartbeat/lrmd -r > root 12122 0.0 1.2 61956 6732 ? SL 15:14 0:00 \_ > /usr/lib64/heartbeat/stonithd > 783 12123 0.0 0.3 65712 2092 ? S 15:14 0:00 \_ > /usr/lib64/heartbeat/attrd > 783 12124 0.0 0.6 72656 3552 ? S 15:14 0:00 \_ > /usr/lib64/heartbeat/crmd > 783 12219 0.0 0.6 70976 3420 ? S 15:15 0:00 \_ > /usr/lib64/heartbeat/pengine > > I used to check HBREAD and HBWRITE processes. With older HB versions > it was displayed, what kind of process each one heartbeat represents. > Now it is not visible anymore.
It still (again?) does it for me, though. heartbeat 3.0.3, heartbeat: master control process \_ heartbeat: FIFO reader \_ heartbeat: write: bcast ethx \_ heartbeat: read: bcast ethx \_ heartbeat: write: bcast eth3 \_ heartbeat: read: bcast eth3 \_ heartbeat: write: mcast br0 \_ heartbeat: read: mcast br0 \_ /usr/lib/heartbeat/ccm \_ /usr/lib/heartbeat/cib \_ /usr/lib/heartbeat/lrmd -r \_ /usr/lib/heartbeat/attrd \_ /usr/lib/heartbeat/crmd -- : Lars Ellenberg : LINBIT | Your Way to High Availability : DRBD/HA support and consulting http://www.linbit.com DRBD® and LINBIT® are registered trademarks of LINBIT, Austria. _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
