Hi,
* I have three nodes: "ha1", "ha2" y "ha3".
* Three resources: "sfex", "xfs_fs", "ip".
* "sfex" and "xfs_fs" are members of a group called "xfs_grp".
* "xfs_grp" can run on any node but "ip" resource can run on "ha1" or
"ha2" only.
* When "xfs_grp" is running on "ha1" or "ha2", "ip" must run on the same
node.
* One last thing, I need manual failback.
My current configuration works except for the "manual failback" (a.k.a.
auto_failback off).
node $id="0ace77ab-600a-4541-a682-ab0534bb3fc4" ha3
node $id="3d1f07b5-a79b-478f-b07c-02a7a5c5106c" ha2
node $id="c44a3a26-35d4-476e-a1e6-49f03f068f12" ha1
primitive ip ocf:heartbeat:IPaddr \
params ip="192.168.1.147"
primitive sfex ocf:heartbeat:sfex \
params device="/dev/sdb1" \
op monitor interval="10" timeout="10" depth="0"
primitive xfs_fs ocf:heartbeat:Filesystem \
params device="/dev/sdb2" directory="/shared" fstype="xfs" \
op monitor interval="20" timeout="40" depth="0"
group xfs_grp sfex xfs_fs
location srv_loc ip -inf: ha3
colocation srv_col inf: ip xfs_grp
property $id="cib-bootstrap-options" \
no-quorum-policy="ignore" \
expected-quorum-votes="1" \
stonith-enabled="0" \
default-resource-stickiness="INFINITY"
When "xfs_grp" is running in "ha3" and "ha1" or "ha2" are alive again, the
resources ("xfs_grp" and "ip") move to any of them.
Any ideas?
Thanks!
--
Diego Woitasen
XTECH
_______________________________________________
Linux-HA mailing list
[email protected]
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems
