Hi, On Thu, Jun 03, 2010 at 02:07:23PM +0200, Alain.Moulle wrote: > Hi , > > I got a problem when starting a failover ip ocf:heartbeat resource > IPaddr and > the problem seems to be that the /findif/ (version 2.99.1) command
That release is rather old. Can you please upgrade to 3.0.3, resource-agents 1.0.3, and cluster-glue 1.0.5. > always return 1 when > starting the resource. So I tried it manually and got an error that I > don't understand : > /usr/lib64/heartbeat/findif *12.13.0.1* This is wrong usage. findif gets the information through environment variables, as shown below. > /usr/lib64/heartbeat/findif version 2.99.1 Copyright Alan Robertson > > Usage: /usr/lib64/heartbeat/findif [-C] > Options: > -C: Output netmask as the number of bits rather than as 4 octets. > Environment variables: > OCF_RESKEY_ip ip address (mandatory!) > OCF_RESKEY_cidr_netmask netmask of interface > OCF_RESKEY_broadcast broadcast address for interface > OCF_RESKEY_nic interface to assign to That's really the basic functionality. Don't see anything special in your configuration. It should just work. Thanks, Dejan > and $?=1 > > whereas ifconfig displays: > 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP > qlen 1000 > link/ether 00:31:22:da:8a:1a brd ff:ff:ff:ff:ff:ff > inet *12.13.0.1*/16 brd 12.13.255.255 scope global eth0 > etc. > > I can't find where is the problem ? > > Thanks for your help. > Regards. > Alain Moullé > > _______________________________________________ > Linux-HA mailing list > [email protected] > http://lists.linux-ha.org/mailman/listinfo/linux-ha > See also: http://linux-ha.org/ReportingProblems _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
