Hi,
On Wed, Oct 20, 2010 at 03:57:22PM -0700, Robinson, Eric wrote:
> Hey folks... don't forget me! I just need to get eyes on the following
> config and make sure my ring numbers, mcastaddr, and mcastports look
> workable...
>
>
> Existing 2-Node Cluster
>
> |----(198.51.100.0/30)---|
> | |
> |---------------------| |---------------------|
> | eth3 | | eth3 |
> | | | |
> | CLUSTER1_A | | CLUSTER1_B |
> | | | |
> | eth0 eth1 | | eth0 eth1 |
> | |--bond0--| | | |--bond0--| |
> | | | | | |
> |---------------------| |---------------------|
> | |
> | |
> ----------------------------(192.168.10.0/24)------------------------
> | | |
> | | |
> |-----------------| |-----------------| |---------------------|
> | | | | | | | | |
> | |--bond0--| | | |--bond0--| | | |--bond0--| |
> | eth0 eth1 | | eth0 eth1 | | eth0 eth1 |
> | | | | | |
> | CLUSTER2_A | | CLUSTER2_B | | CLUSTER2_C |
> | | | | | |
> | eth2 | | eth2 eth3 | | eth3 eth2 |
> |-----------------| |-----------------| |---------------------|
> | | | |
> | |-(198.51.100.4/30)-| |
> | |
> |------(198.51.100.8/30)-----------------------------------|
>
> New 3-Node Cluster
>
>
> The interface sections on existing CLUSTER1 look like this...
>
> interface {
> ringnumber: 0
> bindnetaddr: 192.168.10.0
> mcastaddr: 226.94.1.1
> mcastport: 4000
> }
>
> interface {
> ringnumber: 1
> bindnetaddr: 198.51.100.0
> mcastaddr: 226.94.1.1
> mcastport: 4000
> }
>
> I'm thinking the interface sections on CLUSTER2 need to look like
> this...
>
>
> interface {
> ringnumber: 0
> bindnetaddr: 192.168.10.0
> mcastaddr: 226.94.1.2
> mcastport: 4002
> }
>
> interface {
> ringnumber: 1
> bindnetaddr: 198.51.100.4
> mcastaddr: 226.94.1.2
> mcastport: 4002
> }
> interface {
> ringnumber: 2
> bindnetaddr: 198.51.100.8
> mcastaddr: 226.94.1.2
> mcastport: 4002
> }
>
> Does that look right?
I don't think you can use the last two rings, as they don't span
all nodes. At least that's what it looks like on your diagram.
Otherwise, looks fine. But note that redundant rings are "still
not there" to paraphrase the upstream.
Thanks,
Dejan
> --
> Eric Robinson
>
>
>
>
>
>
> Disclaimer - October 20, 2010
> This email and any files transmitted with it are confidential and intended
> solely for General Linux-HA mailing list. If you are not the named addressee
> you should not disseminate, distribute, copy or alter this email. Any views
> or opinions presented in this email are solely those of the author and might
> not represent those of Physicians' Managed Care or Physician Select
> Management. Warning: Although Physicians' Managed Care or Physician Select
> Management has taken reasonable precautions to ensure no viruses are present
> in this email, the company cannot accept responsibility for any loss or
> damage arising from the use of this email or attachments.
> This disclaimer was added by Policy Patrol: http://www.policypatrol.com/
> _______________________________________________
> Linux-HA mailing list
> [email protected]
> http://lists.linux-ha.org/mailman/listinfo/linux-ha
> See also: http://linux-ha.org/ReportingProblems
_______________________________________________
Linux-HA mailing list
[email protected]
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems
