Hello again, you may ask why I didn't copy/past what is in the log file. My humble apology, the log file is empty with no message in it! %-|
I also tried the heartbest with the same R1 setting that I have on my production, and doing so results the both machine take control of the resources! %-| and since I am using IPaddr in my "haresources" file, both machine claims to have the floating IP address. Thanks, Avestan Avestan wrote: > > Hello, > > I have been using Heartbeat R1 for a long time and have been pretty > satisfied with it. Now, I am trying to move to Heartbeat and Pacemaker as > the CRM and I have followed the information > > http://blog.foaa.de/2010/10/intro-to-pacemaker-on-heartbeat/ Here > > I said, I am trying since I am unable to get this going and the following > is the my setting and configuration: > > [r...@damavand80 ~]# rpm -qa|grep -i heartbeat > heartbeat-libs-3.0.0-0.7.0daab7da36a8.hg.fc14.i686 > heartbeat-3.0.0-0.7.0daab7da36a8.hg.fc14.i686 > [r...@damavand80 ~]# > [r...@damavand80 ~]# rpm -qa|grep -i pacemaker > pacemaker-libs-1.1.4-4.fc14.i686 > pacemaker-1.1.4-4.fc14.i686 > [r...@damavand80 ~]# > > and the following is the configuration file "ha.cf": > > # enable pacemaker, without stonith > crm yes > > # Heartbeat logging configuration > debugfile /var/log/ha-debug > logfile /var/log/ha-log > logfacility local0 > > # warning of soon be dead > warntime 10 > > # declare a host (the other node) dead after: > deadtime 20 > > # dead time on boot (could take some time until net is up) > initdead 120 > > # time between heartbeats > keepalive 2 > > # the nodes > node alamot80 > node damavand80 > > # heartbeats, over the serial cable! > baud 19200 > serial /dev/ttyS0 > > # ping the switch to assure we are online > ping 192.168.178.1 > > The problem is when I start the heartbeat on both machines, the machines > become all of the sudden very busy and I lose ssh connection to them and > after a while I can connect to the machine via ssh and once again I lose > connection and heartbeat doesn't seem to be working. > > In advance I would like to thank you for your help. > > Avestan :drunk: > -- View this message in context: http://old.nabble.com/Problem-with-Heartbeat-3.0-%2B-Pacemaker-1.1-tp30629395p30629789.html Sent from the Linux-HA mailing list archive at Nabble.com. _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
