Hi Dejan, thanks for your answer! I have configured an ipmi stonith device and it works judging by the first tests. Although the ipmi plugin can only reboot a server, not power it off instantly, am I right?
I had configured stonith-action="poweroff" and could spot this line, after an ifdown on the HA network: node1 stonith-ng: [21837]: ERROR: stonith_command: Unknown st_fence reply from node1 node1 stonith-ng: [21837]: WARN: log_data_element: stonith_command: UnknownOp <st-reply st_origin="stonith_construct_async_reply" t="stonith-ng" st_op="st_fence" st_remote_op="dc3c20c7-ec59-4c7b-b536-5e776245d415" st_callid="0" st_callopt="0" st_rc="1" st_output="failed: unrecognised action: poweroff " src="node1" seq="24" /> I then configured the stonith-action to "reboot" and turned off automatic booting for OpenAis, so the node that gets being reset comes back to life but not as part of the cluster. Getting it back into the cluster is just a matter of starting OpenAis again. Thanks again for the input! Cheers, Sascha -----Ursprüngliche Nachricht----- Von: [email protected] [mailto:[email protected]] Im Auftrag von Dejan Muhamedagic Gesendet: Dienstag, 15. März 2011 16:41 An: General Linux-HA mailing list Betreff: Re: [Linux-HA] HP ILO 3 and external/riloe problems Hi, On Tue, Mar 15, 2011 at 02:42:17PM +0100, Sascha Hagedorn wrote: > Hello, > > is anyone using the external/riloe stonith plugin with HP's ILO 3? I cannot > seem to get the stonith riloe plugin to work. Access to the HTTPS > Webinterface works as well as SSH access. external/riloe doesn't work with iLO 3. And it probably never will, because one can use ipmilan or external/ipmi instead. Thanks, Dejan > Here is the output I get: > > node1:~ # stonith -vvv -t external/riloe hostlist=10.140.1.1 > ilo_hostname=10.140.1.1 ilo_user=iluser ilo_password=ilopassword > ilo_can_reset=1 ilo_protocol=2.0 ilo_powerdown_method=button -S > external/riloe[10999]: ERROR: no response from 10.140.1.1 > ** INFO: external_run_cmd: Calling '/usr/lib64/stonith/plugins/external/riloe > status' returned 256 > > ** (process:10997): CRITICAL **: external_status: 'riloe status' failed with > rc 256 > stonith: external/riloe device not accessible. > > Any suggestions on how to debug this furthermore? > > Thanks in advance, > Sascha Hagedorn > _______________________________________________ > Linux-HA mailing list > [email protected] > http://lists.linux-ha.org/mailman/listinfo/linux-ha > See also: http://linux-ha.org/ReportingProblems _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
