It doesn't seem to be working. [root@NODE_A resources]# crm configure primitive resource_vrt_ip ocf:heartbeat:IPaddr2 params ip="192.168.15.73" nic="bond0" meta target-role="Stopped" multiple-active="stop_start" migration-treshold="3" failure-timeout="0" op name="monitor" interval="180" timeout="60"
> WARNING: name=monitor: operation not recognized > WARNING: name=monitor: operation not recognized > Relax-NG validity error : Element op failed to validate attributes > element op: Relax-NG validity error : Expecting an element meta_attributes, got nothing > element op: Relax-NG validity error : Invalid attribute id for element op > element op: Relax-NG validity error : Element operations has extra content: op > Relax-NG validity error : Extra element operations in interleave > element cib: Relax-NG validity error : Element cib failed to validate content > crm_verify[14761]: 2012/03/30_14:28:38 ERROR: main: CIB did not pass DTD/schema validation > Errors found during check: config not valid > ERROR: resource_vrt_ip: attribute migration-treshold does not exist > WARNING: resource_vrt_ip: action name=monitor not advertised in meta-data, it may not be supported by the RA > Do you still want to commit? Any clue about the meaning of the id_spec parameter? Tks -----Messaggio originale----- Da: [email protected] [mailto:[email protected]] Per conto di Andreas Kurz Inviato: venerdì 30 marzo 2012 13:46 A: [email protected] Oggetto: Re: [Linux-HA] crm configure primitive syntax, please HELP!!! On 03/30/2012 01:14 PM, Guglielmo Abbruzzese wrote: > Hi everybody, > I've got a question probably very easy for someone I cant' find a proper answer in the official doc. > In details, if I refer to the official pacemaker documentation related to the command "crm configure primitive" I find what follows: > > usage: primitive <rsc> [<class>:[<provider>:]]<type> > [params <param>=<value> [<param>=<value>...]] > [meta <attribute>=<value> [<attribute>=<value>...]] > [utilization <attribute>=<value> [<attribute>=<value>...]] > [operations id_spec > [op op_type [<attribute>=<value>...] ...]] > > If I launch the following command by CLI: > > crm configure primitive resource_vrt_ip ocf:heartbeat:IPaddr2 params ip="192.168.15.73" nic="bond0" meta target-role="Stopped" multiple-active="stop_start" migration-treshold="3" failure-timeout="0" operations XXXXXXXXX op name="monitor" interval="180" timeout="60" > > I get the following answer: "ERROR: operations: only single $id or $id-ref attribute is allowed" > > Now, I can't get the meaning of the parameter "id_spec" mentioned in the usage output. Could someone help me, or tell me what shell I write instead of XXXXXXXX in order to get the following output in the cib?? > you can omit that "operations XXXXXXXXX" part Regards, Andreas -- Need help with Pacemaker? http://www.hastexo.com/now > <primitive class="ocf" id="resource_vrt_ip" provider="heartbeat" type="IPaddr2"> > <instance_attributes id="resource_vrt_ip-instance_attributes"> > <nvpair id="resource_vrt_ip-instance_attributes-ip" name="ip" value="192.168.15.73"/> > <nvpair id="resource_vrt_ip-instance_attributes-nic" name="nic" value="bond0"/> > </instance_attributes> > <meta_attributes id="resource_vrt_ip-meta_attributes"> > <nvpair id="resource_vrt_ip-meta_attributes-target-role" name="target-role" value="Stopped"/> > <nvpair id="resource_vrt_ip-meta_attributes-multiple-active" name="multiple-active" value="stop_start"/> > <nvpair id="resource_vrt_ip-meta_attributes-migration-threshold" name="migration-threshold" value="3"/> > <nvpair id="resource_vrt_ip-meta_attributes-failure-timeout" name="failure-timeout" value="0"/> > </meta_attributes> > <operations> > <op id="resource_vrt_ip-startup" interval="180" name="monitor" timeout="60s"/> > </operations> > </primitive> > > P.S. I'd prefer not to load a XML file, I already tried it and it works but it is not the purpose of my help request > > Thanks in advance > > > Guglielmo Abbruzzese > Project Leader > > RESI Informatica S.p.A. > Via Pontina Km 44,044 > 04011 Aprilia (LT) - Italy > Tel: +39 0692710 369 > Fax: +39 0692710 208 > Email: [email protected] > Web: www.resi.it > > > _______________________________________________ > Linux-HA mailing list > [email protected] > http://lists.linux-ha.org/mailman/listinfo/linux-ha > See also: http://linux-ha.org/ReportingProblems _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
