Hi Andrew, On Fri, Apr 13, 2012 at 03:50:21PM +1000, Andrew Beekhof wrote: > Looks like someone forgot to strip off the trailing colon from the ifname > > +++ find_interface_generic 192.168.122.110 > +++ ipaddr=192.168.122.110 > +++ read ifname linkstuff > +++ ifconfig > +++ : Read gave us ifname = eth0: > +++ read inet addr junk > +++ : Read gave us inet = inet addr = 192.168.122.103 > +++ read line > +++ '[' 'Xinet6 fe80::5054:ff:fec5:5f28 prefixlen 64 scopeid > 0x20<link>' '!=' X ']' > +++ : Nothing > +++ read line > +++ '[' 'Xether 52:54:00:c5:5f:28 txqueuelen 1000 (Ethernet)' '!=' X ']' > +++ : Nothing > +++ read line > +++ '[' 'XRX packets 154313 bytes 30845824 (29.4 MiB)' '!=' X ']' > +++ : Nothing > +++ read line > +++ '[' 'XRX errors 0 dropped 6418 overruns 0 frame 0' '!=' X ']' > +++ : Nothing > +++ read line > +++ '[' 'XTX packets 135804 bytes 24450439 (23.3 MiB)' '!=' X ']' > +++ : Nothing > +++ read line > +++ '[' 'XTX errors 0 dropped 0 overruns 0 carrier 0 collisions 0' '!=' X > ']' > +++ : Nothing > +++ read line > +++ '[' X '!=' X ']' > +++ case $ifname in > +++ : 'comparing 192.168.122.110 to 192.168.122.103 (from ifconfig)' > +++ case $addr in > +++ read ifname linkstuff > +++ : Read gave us ifname = eth0:0: > +++ read inet addr junk > +++ : Read gave us inet = inet addr = 192.168.122.110 > +++ read line > +++ '[' 'Xether 52:54:00:c5:5f:28 txqueuelen 1000 (Ethernet)' '!=' X ']' > +++ : Nothing > +++ read line > +++ '[' X '!=' X ']' > +++ case $ifname in > +++ : 'comparing 192.168.122.110 to 192.168.122.110 (from ifconfig)' > +++ case $addr in > +++ echo eth0:0: > +++ return 0 > +++ return 1 > ++ NIC=eth0:0: > ++ echo eth0:0: > ++ return 0 > + NIC=eth0:0:
Interesting, don't see the hanging ':' anywhere here, which ifconfig version is that? Fixed now anyway. Thanks, Dejan > [root@pcmk-3 ~]# ip addr > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > inet 127.0.0.1/8 scope host lo > inet6 ::1/128 scope host > valid_lft forever preferred_lft forever > 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast > state UP qlen 1000 > link/ether 52:54:00:c5:5f:28 brd ff:ff:ff:ff:ff:ff > inet 192.168.122.103/24 brd 192.168.122.255 scope global eth0 > inet 192.168.122.110/32 brd 192.168.122.110 scope global eth0:0 > inet6 fe80::5054:ff:fec5:5f28/64 scope link > valid_lft forever preferred_lft forever > [root@pcmk-3 ~]# ifconfig > eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 > inet 192.168.122.103 netmask 255.255.255.0 broadcast 192.168.122.255 > inet6 fe80::5054:ff:fec5:5f28 prefixlen 64 scopeid 0x20<link> > ether 52:54:00:c5:5f:28 txqueuelen 1000 (Ethernet) > RX packets 154815 bytes 30877518 (29.4 MiB) > RX errors 0 dropped 6651 overruns 0 frame 0 > TX packets 136029 bytes 24479561 (23.3 MiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > eth0:0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 > inet 192.168.122.110 netmask 255.255.255.255 broadcast > 192.168.122.110 > ether 52:54:00:c5:5f:28 txqueuelen 1000 (Ethernet) > > lo: flags=73<UP,LOOPBACK,RUNNING> mtu 16436 > inet 127.0.0.1 netmask 255.0.0.0 > inet6 ::1 prefixlen 128 scopeid 0x10<host> > loop txqueuelen 0 (Local Loopback) > RX packets 436 bytes 44614 (43.5 KiB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 436 bytes 44614 (43.5 KiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > _______________________________________________ > Linux-HA mailing list > [email protected] > http://lists.linux-ha.org/mailman/listinfo/linux-ha > See also: http://linux-ha.org/ReportingProblems _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
