Glad to hear it - HTH! Nikita Michalko
Am 16.04.2012 19:10, schrieb Pham, Tom: > ------------------------------ > Thanks Nikita, > The ipmitool work fine now. The password and user I was given from the person > who configured the iLO is not correct. I created a new one and it works fine > now. > > Message: 4 > Date: Fri, 13 Apr 2012 09:52:06 +0200 > From: Nikita Michalko<[email protected]> > Subject: Re: [Linux-HA] Problem with stonith RA using external/ipmi > over lan or lanplus interface > To: "General Linux-HA mailing list"<[email protected]> > Message-ID:<[email protected]> > Content-Type: Text/Plain; charset="iso-8859-1" > > Hi, > > >> When I tried ipmitool -I lan -U root -H ip -a chassis power cycle. It did not > work but it worked with -I open interface. > -> it can't work without IP-adr. (ip=?) > > You must first configure the ipmi( iLO 3) card with ipmitool, e.g.: > ipmitool lan print > ipmitool lan set 1 ipaddr 10.10.40.48 > ipmitool lan set 1 netmask 255.255.255.0 > ipmitool lan set 1 defgw ipaddr 10.10.40.1 > ipmitool lan set 1 auth ADMIN PASSWORD > ipmitool lan set 1 user > > ... etc -> man ipmitool is your friend ;-) > >> What should I do to enable lan/lanplus on SUSE 11? > > > Nikita Michalko > > > > > ------------------------------ > > > _______________________________________________ > Linux-HA mailing list > [email protected] > http://lists.linux-ha.org/mailman/listinfo/linux-ha > See also: http://linux-ha.org/ReportingProblems > > End of Linux-HA Digest, Vol 101, Issue 13 > ***************************************** > _______________________________________________ > Linux-HA mailing list > [email protected] > http://lists.linux-ha.org/mailman/listinfo/linux-ha > See also: http://linux-ha.org/ReportingProblems _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
