El 05/20/2012 10:28 AM, David Coulson escribió:
> What is your clustering software and what is the configuration? Also
> post your DRBD configuration and the output from cat /proc/drbd during
> each stage of your testing which reproduces the issue.
>
> Maybe post some kernel logs too would be helpful. Simply switching
> pri/sec on DRBD won't cause a node to go outdated, unless you split
> brain the environment.
>
> David
>
> On 5/20/12 9:25 AM, Net Warrior wrote:
>> Hi there list!
>>
>> I've got a doubt regariding DRBD usage, at the moment I'm trying to
>> implement a HA systems with two nodes, is a easy and basic setup
>> Two servers, running oracle and LVM.
>>
>> I configured once resource lest's say /dev/rootvg/myoracle-device on
>> both, this is working fine, I can perform a manual failover as follow
>>
>> drdbadm secondary node1
>> umount /dev/drbd1
>>
>> drdbadm primary node2
>> mount /dev/drbd1
>>
>> This works fine and I have both serer sincronized, my problem or doubt
>> is, when the other node fails,lets say, I power it off, the node2 takes
>> primary
>> role, I do it manually, but I have the information Outdated and I loose
>> lots of information and I have to wait till node1 comes up to syncronize
>> with it.
>>
>> So, does DRBD work like that? I thought DRBD was syncronizing in
>> backround to the other node to have both nodes with the same
>> information, PLEASE,
>> correct me if I'm wrong, cuz maybe this solution in not well implemented
>> configured or I missunderstood what'd DRBD is for.
>>
>>
>> Thanks for your time and support
>> Best regards
>>
>>
>>
>>
>> _______________________________________________
>> Linux-HA mailing list
>> [email protected]
>> http://lists.linux-ha.org/mailman/listinfo/linux-ha
>> See also: http://linux-ha.org/ReportingProblems
Sorry, but there was a configuration issue, now I'm able to syncronize,
anyway I've have some question and I'd like to share my configuration
with you.
This is what I've got
resource myresource {
syncer {
rate 100M;
}
on node1 {
device /dev/drbd1;
disk /dev/rootvg/lv01;
address x.x.x.x:7789;
meta-disk /dev/rootvg/drbdmetadata[0];
}
on node2 {
device /dev/drbd1;
disk /dev/rootvg/lv01;
address x.x.x.x:7789;
meta-disk /dev/rootvg/drbdmetadata[0];
}
}
Cuz I did not want to play expanding the LV and loose the data I have on
it I just created another LV to store the metadada on it
/dev/rootvg/drbdmetadata
which is 512 MB in size.
I was able to perform a manual failover without data loss and I'm happy
with that, now I'd like to add another Logical Volume and now my 2
questions are
1 - Should I add the other LV to my config and restart or do I have to
make again a drbdadm create myresource ?
2 - Is drbdmetadata related to my LV size? any considerations on this
regarding it's size?
Thanks for your time and support
Best Regards
_______________________________________________
Linux-HA mailing list
[email protected]
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems
