No ideas?
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Yount, William D
Sent: Thursday, August 16, 2012 9:09 PM
To: [email protected]
Subject: [Linux-HA] IP Clone
I have two servers. I am using pacemaker/cman(corosync). I am trying to share
an IP address between them. I would like the IP address to run on both servers
at the same time. However, my testing has shown that the IP address stays
locked onto Server2. If I put Server2 in standby, then the IP address is no
longer reachable even though it shows it is running on Server1. I was wondering
if anyone could spot the reason why in the configuration below:
<cib epoch="1177" num_updates="0" admin_epoch="0" validate-with="pacemaker-1.2"
cib-last-written="Thu Aug 16 20:49:46 2012" crm_feature_set="3.0.6"
update-origin="Server2" update-client="crmd" have-quorum="1" dc-uuid=" Server1">
<configuration>
<crm_config>
<cluster_property_set id="cib-bootstrap-options">
<nvpair id="cib-bootstrap-options-dc-version" name="dc-version"
value="1.1.7-6.el6-148fccfd5985c5590cc601123c6c16e966b85d14"/>
<nvpair id="cib-bootstrap-options-cluster-infrastructure"
name="cluster-infrastructure" value="cman"/>
<nvpair id="cib-bootstrap-options-expected-quorum-votes"
name="expected-quorum-votes" value="2"/>
<nvpair id="cib-bootstrap-options-stonith-enabled"
name="stonith-enabled" value="false"/>
<nvpair id="cib-bootstrap-options-no-quorum-policy"
name="no-quorum-policy" value="ignore"/>
<nvpair id="cib-bootstrap-options-last-lrm-refresh"
name="last-lrm-refresh" value="1345168331"/>
</cluster_property_set>
</crm_config>
<nodes>
<node id=" Server1" type="normal" uname="Server1">
<instance_attributes id="nodes-Server1">
<nvpair id="nodes- Server1-standby" name="standby" value="off"/>
</instance_attributes>
</node>
<node id="Server2" type="normal" uname="Server2">
<instance_attributes id="nodes-Server2">
<nvpair id="nodes- Server2-standby" name="standby" value="off"/>
</instance_attributes>
</node>
</nodes>
<resources>
<clone id="cl_IPaddr2_1">
<meta_attributes id="cl_IPaddr2_1-meta_attributes">
<nvpair id="cl_IPaddr2_1-meta_attributes-clone-max" name="clone-max"
value="2"/>
<nvpair id="cl_IPaddr2_1-meta_attributes-notify" name="notify"
value="true"/>
<nvpair id="cl_IPaddr2_1-meta_attributes-interleave"
name="interleave" value="true"/>
</meta_attributes>
<primitive id="res_IPaddr2_1" class="ocf" provider="heartbeat"
type="IPaddr2">
<instance_attributes id="res_IPaddr2_1-instance_attributes">
<nvpair id="nvpair-res_IPaddr2_1-ip" name="ip" value="10.89.99.30"/>
<nvpair id="nvpair-res_IPaddr2_1-cidr_netmask" name="cidr_netmask"
value="22"/>
</instance_attributes>
<operations id="res_IPaddr2_1-operations">
<op interval="0" id="op-res_IPaddr2_1-start" name="start"
timeout="20"/>
<op interval="0" id="op-res_IPaddr2_1-stop" name="stop"
timeout="20"/>
<op id="op-res_IPaddr2_1-monitor" name="monitor" interval="10"
timeout="20" start-delay="0"/>
</operations>
<meta_attributes id="res_IPaddr2_1-meta_attributes"/>
</primitive>
</clone>
</resources>
<constraints/>
<op_defaults>
<meta_attributes id="op-options">
<nvpair id="op-options-timeout" name="timeout" value="240s"/>
</meta_attributes>
</op_defaults>
<rsc_defaults>
<meta_attributes id="rsc-options">
<nvpair id="rsc-options-resource-stickiness" name="resource-stickiness"
value="100"/>
</meta_attributes>
</rsc_defaults>
</configuration>
</cib>
Thanks,
William
_______________________________________________
Linux-HA mailing list
[email protected]
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems
_______________________________________________
Linux-HA mailing list
[email protected]
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems
