In fact ipmitool work like a charm It's pacemaker witch decide to restart the cluster after send other ipmitool command It's seem we can change this behavior with stonith action
thanks Le 22/01/2013 09:24, Emmanuel Saint-Joanis a écrit : > Sometimes the poweroff is caught by the OS, and therefore launches a > soft halt. > > Try to see if those two imply similar response or not. > ipmitool -H host1 -U root1 -P secret1 power off > ipmitool -H host1 -U root1 -P secret1 power cycle > or whatever works with ipmilan > > 2013/1/21 zorg <[email protected] <mailto:[email protected]>> > > Hello > I have a working example using pacemaker corosync with stonith > > primitive s_ipmi_hv1 stonith:fence_ipmilan \ > op monitor interval="20s" \ > params action="off" pcmk_host_check="static-list" > pcmk_host_list="hv2" ipaddr="21.37.43.132" login="admin" > passwd="xxxxx" > power_wait="4" lanplus="true" delay="1" verbose="1" > primitive s_ipmi_hv2 stonith:fence_ipmilan \ > op monitor interval="20s" \ > params action="off" pcmk_host_check="static-list" > pcmk_host_list="hv1" ipaddr="21.37.43.130" login="admin" passwd="xxxx" > power_wait="4" lanplus="true" delay="10" verbose="1" > location loc-prefer-stonith-1 s_ipmi_hv1 \ > rule $id="loc-prefer-stonith-1-rule" inf: #uname eq hv1 > location loc-prefer-stonith-2 s_ipmi_hv2 \ > rule $id="loc-prefer-stonith-2-rule" inf: #uname eq hv2 > > > But When I set > stonith-action=poweroff stonith stop working > > and if I reset back to > stonith-action=reboot it working killing the node > > I really can't undestand why > > _______________________________________________ > Linux-HA mailing list > [email protected] <mailto:[email protected]> > http://lists.linux-ha.org/mailman/listinfo/linux-ha > See also: http://linux-ha.org/ReportingProblems > > _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
