If this is a new installation, please switch to corosync + pacemaker.
Heartbeat has not been actively developed in some time, and there are no
plans to restart development. It is deprecated.
digimer
On 01/03/14 08:53 AM, Nguyen Quoc Viet wrote:
Dear team linux-ha,
I setup 2 server : primary and secondary. I install heartbeat on both server
, primary take over Virtual IP eth0:0 (192.168.2.10) , file ha.cf on both
server:
debugfile /var/log/ha-debug
logfile /var/log/ha-log
logfacility local0
### set time between 2 server
keepalive 2
### node is pronounced dead after 30s
deadtime 30
###With some configurations, the network takes some time to start working
after a reboot.
##This is a separate "deadtime" to handle that case. It should be at least
twice the normal deadtime.
initdead 60
udpport 694
ucast eth1 192.168.1.3(192.168.1.4 on secondary)
auto_failback on
##node primary
node web1
###node secondary
node web2
Everthing works very well, but sometimes interface eth0 on primary is block
, I cannot ping primary , I have to run command ifdown eth0 && ifup eth0 on
primary, it works again well.
I check log ha-log, ha-debug , /var/log/message but I don't find suspencious
anything .
what's happend, can you help me? Thanks
Big thanks!
_______________________________________________
Linux-HA mailing list
[email protected]
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems
--
Digimer
Papers and Projects: https://alteeve.ca/w/
What if the cure for cancer is trapped in the mind of a person without
access to education?
_______________________________________________
Linux-HA mailing list
[email protected]
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems
