On Thu, Sep 04, 2014 at 02:32:14PM +0200, Ulrich Windl wrote:
> Hi!
>
> I'm using ocf:pacemaker:ping to ping some specific address. The requirement
> is that a specific source address (that is on a local interface) is being
> used to ping a destination. So if the resource moves between nodes, the same
> source address shall be used.
>
> The address to use is a secondary adress on interface bond0, like bond0:xyz.
> I can spacify "-I bond0" and "-I bond0:xyz", but the latter seems to be
> ignores, as if I just said "-I bond0". Ping is from iputils-ss021109-292.28.1
> (SLES11 SP3).
>
> I had this requirement for HP-UX years ago, and the solution was to install a
> special local ping that allowed to select the source address.
> So my preferences are:
> 1) Get it done with the software I have
ping -w 2 -c 3 -I 127.0.0.1 8.8.8.8
ping: sendmsg: Invalid argument
ping: sendmsg: Invalid argument
PING 8.8.8.8 (8.8.8.8) from 127.0.0.1 : 56(84) bytes of data.
--- 8.8.8.8 ping statistics ---
2 packets transmitted, 0 received, 100% packet loss, time 1008ms
ping -w 2 -c 3 -I 10.11.12.13 8.8.8.8
bind: Cannot assign requested address
ping -w 2 -c 3 -I 10.43.9.55 8.8.8.8
PING 8.8.8.8 (8.8.8.8) from 10.43.9.55 : 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=41 time=27.4 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=41 time=27.4 ms
--- 8.8.8.8 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1000ms
rtt min/avg/max/mdev = 27.405/27.430/27.456/0.167 ms
Does that help?
--
: Lars Ellenberg
: LINBIT | Your Way to High Availability
: DRBD/HA support and consulting http://www.linbit.com
DRBD® and LINBIT® are registered trademarks of LINBIT, Austria.
_______________________________________________
Linux-HA mailing list
[email protected]
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems
