I started to use gMFSK and I wanted it to get working with the parallel port PTT driver I made for soundmodem. The problem that I am having is that when I modprobe in parport, parport_pc, and lp and go to gMFSK and ask it to use /dev/lp0 it says that it isn't either a serial or parallel port. I'm not really sure what the means in this context, or how it checks past just seeing that it is a device. I can see lp0 in /dev and see that it is a character special device. I'm also concerned that it will just set the DCD or RTS high instead of the first data port based on the tick boxes in the config. Soundmodem has it setup to use the data pin. I have that driving a transistor that closes a pin to ground to put the TX on. Any ideas on this setup?
Jonathan Lassoff (KG6THI) - To unsubscribe from this list: send the line "unsubscribe linux-hams" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
