Thanks for the info. On Sat, Feb 10, 2007 at 04:39:51PM -0500, bud Thompson wrote: > Don - On 1200b VHF packet 500ms is quite long for a TXD. When used with a > firmware-based TNC such as a KPC3 such long TXD values are only required by > the oldest of old radios with coil/armature relays for change-over from > TX/RX on one end or the other of the link.
The radios on both ends are quite new. > At 1200b with modern radios and firmware-based TNCs a TXD > 250ms is seldom > required. TXD of 200-250 is often realized where S/N is good. 250 seems to work mostly but a few packets don't get seen. 300 is as good as 500 was. I'll double check on what equipment is on the other end. -- Don - To unsubscribe from this list: send the line "unsubscribe linux-hams" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
