I have been frantically trying to get AXIP using UDP setup between a couple of boxes for APRS use and I am about at my wits end. I stumbled across this list while searching for information, so I'm hoping someone here can help me.
Basically what I have are two boxes, 1 is running Debian 3.1 with a custom 2.4.33 kernel and AX.25 support compiled directly in. The other box is Ubuntu 6.06 with the standard K7 kernel that can be found in the repository. I have libax25, ax25-apps, and ax25-tools setup on both machines, both were installed from the repositories. I setup my axports file as well as ax25ipd.conf files on both machines. Ran kissattach to ptyp0 on the ubuntu machine, ptyp1 on the debian machine(I already have an existing AXIP link to another system on ptyp0 on this machine, because of that I created a seperate ax25ipd config file on this box and started ax25ipd with the -c flag) Now, I've either got something setup wrong, or I have a false indication of how this stuff is supposed to work. In theory, I'm thinking that I should see any traffic that I send from my Ubuntu machine show up on the debian machine using listen? I can see it leaving the Ubuntu machine using listen, but I do not see it on the debian machine. I am sending standard APRS UI beacons from Xastir that look like this: [EMAIL PROTECTED]:~$ sudo listen -a -p aprslcl aprslcl: fm N1VLV-1 to APX184 via WIDE2-2 ctl UI^ pid=F0(Text) len 60 0000 =3619.24N/08217.40WxN1VLV Xastir 1.8.4 http://www.n1vlv.com . Yet, I get nothing on the other box. It's not a LAN problem, I am on the same subnet, no firewalls, I can ping each box etc. Again, I may be expecting this to do something it is uncapable of, or something is broken or misconfigured? If anyone can help with this frustrating issue it will most certainly be appreciated, I can post up configs etc if needed. Stephen N1VLV - To unsubscribe from this list: send the line "unsubscribe linux-hams" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
