On 3/14/07, Richard Stearn <[EMAIL PROTECTED]> wrote:
Greeting all
I am attempting to add ROSE to wireshark (ethereal). My preference is
to code the protocol analyser from the specification document rather
than reverse engineer an existing driver stack.
The RATS web site www.rats.org now goes to a holding site. Does anyone
have either an electronic copy of the ROSE spec or a URL to a current
copy?
Richard,
I googled on X.25 PLP and found that most of the descriptors pretty much
follow what I recall from Brian Lantz decoding of ROSE in TNOS. Listen
does not show the GFI just the LCN. Here is a good website for the X.25
PLP breakout:
http://www.techfest.com/networking/wan/x25plp.htm
Also perhaps Bernard F6BVP can provide you information or Jean-Paul
F6FBB, Bernard is actively working on FPAC (the set of tools and wrapper
that makes ROSE easy to use under Linux and also allows for integration
of IP and NetRom under a single system).
Back to X.25 PLP, there is a lot of info out there and again as far as I
can remember, the only things that may not have been always visible
were all of the different cause diagnostic codes because there are a
lot of them that deal with commercial operations.
--
Chuck Hast -- KP4DJT --
To paraphrase my flight instructor;
"the only dumb question is the one you DID NOT ask resulting in my going
out and having to identify your bits and pieces in the midst of torn
and twisted metal."
-
To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
