Hi all,
I am interested in using wifi devices for ham-radio use, especially for
HSMM (adhoc, olsr) and HAMNET; e.g. by extending their frequency-range
for the complete hamradio bands.
One of these devices I am looking at for 6 cm operations is the AC600
(mt7610-based).
http://www.aliexpress.com/item/New-Mini-2-4GHz-5GHz-Dual-Band-USB-Network-Card-5dBi-Antenna-AC600-802-11ac-Wireless/32246544516.html
For that, I have been hacking the kernel-driver found here:
https://github.com/coolshou/mt7610u
I managed to change the driver to get it to work on all channels in the
13 cm and 6 cm bands: channels 1 (2.412Ghz) to 6 (2.437) and channels
132 (5.660 Ghz) up to 168 (5.840 Ghz).
As of today, I have been running pings and olsr between two linux PCs
(Ubuntu LTS) using these devices on 5 Ghz in wifi ad-hoc mode.
However, I am now running into a number of issues:
- packets being queued before being send (i.e. a one-ping per second is
not received at the same rate at the remote side: first 4 seconds
nothing is received and then a burst of 4 pings in one go)
- packets lost
- "iwlist freq" only shows parts of the frequencies
- "ifconfig" does not show the ESSID you have configures (but it does
seams to use it).
And, in short, the code can use a lot of cleaning.
So I am looking for people who can help me with information about this:
- does anybody have a good document that explains how userland
application interact with a kernel wifi network driver: sending data,
receiving data, iwconfig, iw, iwpriv, ...
- Does anybody have experience with adapting wifi devices for ham-radio?
I did some work on atheros-based wifi dongles to get them to operate on
2.3 Ghz before, but these "mt7610u" drivers seams to be a lot more
complex. So any advice would be helpfull.
Is there documentation of other simular projects?
- When searching the web, I found multiple different drivers for the
mt7610u; all a bit different and from different projects.
Even on the kernel.org website, there is another version for the 4.5
kernel.
Are there other / better drivers out there for the mt7610u then the one
I use now, that can be more easily addapted for ham-radio use?
My goal would be to run this on small unix-boards (RPi, BBB, ...) as
dedicated network node for HSMM or hamnet; so drivers compatible with
the versions of the linux kernel found on these devices are interesting.
- Has anybody done RF measurements on these 5 Ghz wifi-sticks and looked
at the RF signal they transmit, e.g. when using the frequencies not
assigned for the official wifi-channels?
- Has anybody ever tested these AC600/mr7610u devices and checked if
they can operate below 2.4 Ghz? (like the atheros chips)?
Any info would be very usefull.
73
kristoff - ON1ARF
--
To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
