On Fri, 27 Nov 1998, Hamish Moffatt wrote:
> On Thu, Nov 26, 1998 at 06:04:34PM +0000, Jorge Matias wrote:
> > My first problem is with PTT. In the PTT pin there is a resistor right
> > after the transistor BC237. Is that needed? This is because my radio only
> > transmits when it has a shortcut to ground in the PTT pin.
>
> I think your radio wants low resistance but not a short necessarily.
> Which radio is it?
At this moment I'm testing YAM with IC-706MkII. My Dual Band Radio is
broken. The PTT problem is solved right now. Thanks
> > The second problem is that I cannot receive anything after installing
> > the software in Linux. I see the Rx LED working when it is receiving
> > audio, but I also know that the LED only works after installing
> > mcs1k2b5.mcs (only testing 1200bauds at the moment).
>
> Yes the LED will only work after loading the the mcs file, the Xilinx
> FPGA has to be programmed each time power is applied; until then the
> LED is basically not connected, as are the rest of the pins.
Ok, that part is confirmed, but I can only receive packets in
DOS/FlexNet. In Linux I still don't receive anything.
73,
Jorge Matias (CT2HBZ)
- -- --- ------------------------------------------------- --- -- -
Computer Science Student at Instituto Superior Tecnico (Lisbon)
A3000/060 32Mb -[Ariadne][MFC III][CV64]- LinuxOS 2.0.33
QRZ: CT2HBZ - E-Mail: [EMAIL PROTECTED]
