According to Bjoern Giesler: While burning my CPU.
>
> Hi,
>
> sorry if this is a dumb question. I've just set up AX.25 stuff on my
> machine, and it _looks_ as if it works... only, I can't reach anybody via
> call(1). listen(1) will happily give me all the traffic that is going on,
> but if I call out, nobody answers me. Could anybody tell me what I'm
> doing wrong? Here is an excerpt from listen (ML1TDN is me):
I presume we talking 27 mhz cb packet radio.
Check things like tx delay (to short)
Radios from danita and a few others need a very long tx delay because the
locktime for the PLL is so long, up to 400 millisconds.
Is your dcd set properly,
Make sure your modulation is not set to high, or to low, get someone to
compare your audio with another signal.
These are but a few things to look for, they are the common causes of your
problem.
>
> etc. ad nauseam. I've tried this with a number of other callsigns
> beside KACITY; no reply.
>
> Since I am an absolute beginner wrt HAM, I have no idea what other
> things (logs, /proc stuff, /etc/ax25 stuff) to include, so if some
> information is missing, please tell me.
Knowing what hardware you use might have been a help.
>
> Thanks in advance,
> --Bjoern
> --
> + thanks for your time, worship the antichrist, and have a nice day /\
> +----------------------------------------------------------------- /()\
> + support privacy on the 'net: mail me for pgp public key /____\
>
--
Regards Richard.
[EMAIL PROTECTED]
