Howdy,
I've done the following to configure a gateway.
--
/usr/sbin/kissattach -i 44.155.6.32 /dev/ttyS1 70cm
/sbin/ifconfig ax0 netmask 255.255.255.0 broadcast 44.155.6.255
/sbin/route add -host 44.155.6.32 ax0
/sbin/route add -net 44.155.6.0 window 1024 ax0
#sleep 1
/usr/sbin/nrattach netrom
/sbin/ifconfig nr0 44.155.6.32 netmask 255.255.0.0
/sbin/route add 44.155.6.32 nr0
/usr/sbin/netromd -i
/usr/sbin/ax25d
# Gateway stuff
/sbin/ifconfig tunl0 44.155.6.32 mtu 512 up
#/root/ampr-routes
/usr/sbin/axparms -assoc ei7ig ei7ig
/usr/sbin/axparms -assoc root ei3rcw
/usr/sbin/axparms -assoc 2e1avx 2e1a
--
after this I run the output from the tunnel-munge script, with my own entry
removed of course...
the problem seems to be that I'm not getting replies from anyone
ifconfig on the tunl0 device seems to suggest that packet are going out...
Any ideas folks?
MTIA
--
John Ronan <[EMAIL PROTECTED]>,
Telecom Systems Software Group - WIT, +353-51-302412, http://www-tssg.wit.ie
================================================================================
